HIKVISION DS-3E2510P Gigabit Full Managed PoE Switch User Guide

HIKVISION DS-3E2510P Gigabit Full Managed PoE Switch User Guide

Features and Functions

  • DS-3E2510P supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;
  • DS-3E2510P has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods;
  • DS-3E2510P supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
  • DS-3E2510P supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy;
  • DS-3E2510P supports IEEE 802.3AF/AT standard, built-in large power supply, no need of external power supply, that is, 24-port AF full-load power supply.
  • DS-3E2510P supports the configuration of Base-T port priority when the power is inadequate.
  • DS-3E2510P supports POE port and up to 4KV power thunder-proof.
  • DS-3E2510P supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services;
  • DS-3E2510P provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services;
  • DS-3E2510P supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR”;
  • Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions;
  • Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+;
  • DS-3E2510P supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions;
  • DS-3E2510P supports perfect ring detection mechanism which ensures the long-term stable running of network;
  • DS-3E2510P supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security;
  • DS-3E2510P supports many management modes such as the console port, Telnet, SSH;
  • DS-3E2510P supports the WEB management mode, which is easy and  efficient so that it makes installation and debugging convenient;
  • DS-3E2510P supports TFTP-patterned file upload/download management;

Specifications

Item DS-3E2510P
Port number 8 x 10/100/1000Base-T PoE ports, 2 1000Base-X SFP ports, 1 Console port
Switching capacity 20Gbps
Packet forwarding rate 15Mpps
MAC address table 8K
Dimensions(L × H × D) 280 mm × 45 mm × 179 mm
Consumption <15W
POE standard IEEE802.3af, IEEE802.3at
POE power budget 125W
Power supply AC:100V-240V,50Hz±10%
Environment Operating temperature/humidity: 0℃-45℃,5%-95% non-condensing

Storage temperature/humidity: -20℃-70℃;5%-95% non-condensing

MAC exchange Static configuration and dynamic MAC learning; MAC browsing and removal Configurable aging time of the MAC address; Limited number of learnable MAC addresses; MAC filtration
VLAN 4K VLAN; GVRP; QinQ; Private VLAN
STP 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP)BPDU protection, root protection, and loopback protection
Multicast IGMP v1/v2/v3 IGMP snooping IGMP Fast LeaveMulticast group strategy and quantity limitation
QoS Flow classification based on L2~4 protocols CAR flow limit

802.1P/DSCP priority re-labeling SP, WRR, and “SP+WRR”

Congestion avoidance mechanisms like Tail-Drop and WRED

Flow monitoring and flow shaping

Security L2/L3/L4 ACL flow identification and filtration

DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc

Broadcast/multicast/unknown unicast storm-control Port isolation

Port security, and “IP+MAC+port” binding

Reliability Static/LACP link aggregation

EAPS and ERPS

Management Console, Telnet, SSH2.0, Web SNMP v1/v2/v3

TFTP

RMON

Physical Interfaces

Front Panel

 No.  Abbrev.  Name  Remarks
 1  PWR  power indicator  If the switch is powered on, the indicator is on.
 2  RESET  RESET  Resume to the default setting.
 3  SYS  System indicator If the indicator is always on, the system is started up. If the indicator flickers, the system works normally.
 4  PoE  PoE                               indicator

 

corresponding to each port

 If the indicator is always on, the PoE works normally.

 If the indicator is off, the PoE does not work.

 5  Lnk/Act  Lnk/Act indicator corresponding to each port  Green indicator is on: 10/100M is transmitted; Red indicator is on: 1000M is transmitted;

No indicator is on: no signal is transmitted.

 6  /   RJ45 interfaces  Realizes the PoE function and forwards 10/100/1000M

 Ethernet electrical signals

 7  Console  Console  Manages the switch locally.
8  /  2 SFP ports  Realizes the forward of gigabit Ethernet optical signals.

HeadquartersNo.555 Qianmo Road, Binjiang District,Hangzhou 310051, ChinaT +86-571-8807-5998overseasbusiness®hilwision.com

Hikvision USAT +1-909-89S-0400[email protected]

Hikvision ItalyT 439-0438-6902 [email protected]

Hikvision SingaporeT +65-668L1-4718[email protected]

Hikvision EuropeT +31-23-5542770 [email protected]

Hikvision FranceT +33(011-85-330-444 infafr©hilwision.com

Hikvision OceaniaT +61-2-8599-4233[email protected]

Hikvision Middle EastT +971-L1-8816086[email protected] corn

Hikvision SpainT +34-91-737-16-55[email protected]

Hikvision Hong KongT +852-2151-1761

Hikvision RussiaT +7-495-669-67-99saleru®hikvision.corn

Hikvision PolandT 4118-22-460-01-50potandOhikvision.com

Hikvision CanadaT +1-909-895-0400

Hikvision IndiaT +91-22-281469900[email protected]

Hikvision UKT +4i-1628-9021-Li[email protected]

 

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by