HROEENOI JZ02 Active Noise Cancelling Headphones User Guide

Table of Contents

Active Noise Cancelling HeadphonesUser Guide

Short press multifunction button (about 1 second), the headphones will be on, and the power-on indicator will light blue
Long press multifunction button (about S seconds), the headphones will be off.
When active noise cancellation is ON (ANC button is pressed, and the ANC indicator lights green), the headphones will keep the power on.
When active noise cancellation is OFF, the headphones will automatically turn off in 5 minutes if no connection with the Blue-tooth device.

Pairing: blue and red indicator flashes alternately Connected: blue indicator flashes every 10 seconds

When turned on, JZO2 will automatically connect to the last connected device if available. If not, JZO2 will go-to pairing.
To connect to a new device: turn Bluetooth off of connected Then turn Bluetooth on of the new device and select JZ02 to connect.
Having connection problems? Delete JZO2 from the device’s Bluetooth list, and re-connect.

Press the ANC button, the active noise cancellation will be on, and the ANC-led indicator will light green steadily.
Press the ANC button, the active noise cancellation will be OFF.

Connect to two Bluetooth devices at the same time to switch between calls, video conferencing, listening to music, and more without reconnection.
For example, when connected to laptop and phone simultaneously, you can pause the playing film on the laptop, and switch to the phone to play the paused music. No need for reconnection.

In case the headphones are connected to the laptop and phone at the same time, and you receive a phone call while watching a film on the laptop, you can answer the phone call immediately by short pressing the multifunction button on the headphones. No need to answer the call on the phone. Very convenient.

Pause/PlayShort press the multifunction button

Next track/Previous trackLong press the +/- button (more than 1 second)

Volume up/downVolume up/down

When connected via AUX, play audio directly via the connected device
3.5mm Audio Jack: You can use it as wired headphones. They give the sound an improvement when using the headphones wired in. When the battery is low or if you want to conserve battery, just switch the wireless mode to wired mode, keep listening with the headphones jack.

Microphone Usage Tips

The use of the microphone needs to be converted to a Bluetooth mode connection.
Earmuffs should not be disassembled or assembled without permission. The earmuffs and ear shells are directly attached to the buckles. If they have been disassembled, please check whether each buckle has been inserted into the earmuffs.
To use these Bluetooth headphones with ZOOM and other software on the computer, it must be in the Bluetooth connection state and change the audio input and output to these Bluetooth headphones in the ZOOM software settings. Use the audio cable to connect without the microphone function.

Bluetooth Connection Occasionally Interrupted

When you plug in the Type-C Charging Cable to charge the
When you plug in the AUX Cable as a wired headphone using.
The playback environment needs to be performed in a stable network environment (avoid the headphones close to other wireless devices (wireless routers, microwave ovens, etc).

Headphones Connect to TV

Reset your headphones

When the headphone is on, press and hold the MFB (power button)/V+ button (volume + button) at the same time for 5 seconds, and then restart to complete the reset operation.

Warm Prompt

Headphones will smell because of the material. If the headphone smells, you should open and leave it for 10-30 minutes before using.
When the headphones cannot be turned on normally the first time you use them, please charge it for 10-30 minutes before

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-27

admin

Tags: