3-in-1 HDT Cable for GameCube®/ N64®/ Super NES®
Cable Status GuideThe colored LED INDICATOR LIGHTS on your cable tells you your cable’s status. The BLUE light indicates that the cable is transmitting a signal. The RED light indicates the cable is powered ON.
Both Blue and Red Light On = Cable is workingRed Light Only = Sleep Mode
If your cable has no signal for 10 minutes, it will switch to Sleep Mode.Note: If your cable is not functioning correctly, an additional power source might be required. Connect the included Micro cable into the Micro port on the HD Cable and the other end into a 5V 1A USB power source. The power source is not included.
Please visit www.Hyperkin.com/warranty to register your official Hyperkin product.
Statement of Compliance with EU DirectiveHyperkin Inc., located at 1939 West Mission Blvd, Pomona, CA 91766, declares under our sole responsibility that the product, 3-In-1 HDTV Cable For GameCube®/ N64®/ Super NES®, is in compliance with the essential requirements and other relevant provisions of Low Voltage Directive (LVD) 2014/35/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU and carries the CE marking.The full Declaration of Conformity can be requested by emailing:Email: [email protected]Company Name: Hyperkin Inc.Address: 1939 West Mission Blvd, Pomona, CA 91766
© 2020 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. GameCube®, N64®, and Super NES® are registered trademarks of Nintendo® of America Inc. This product is not designed, manufactured, sponsored, endorsed, or authorized by Nintendo® of America Inc. in the United States and/or other countries. All rights reserved. Made in China.
[xyz-ips snippet=”download-snippet”]