klipxtreme LiteTouch KTE-005
Introduction
Thank you for purchasing the Klip Xtreme KTE-005 True Wireless Stereo earbuds with Bluetooth® wireless technology. By pairing them with mobile audio devices also enabled with this technology, the earbuds offer great audio quality, excellent performance and the freedom of listening to music or taking calls easily everywhere you go.
We encourage you to thoroughly read this quick installation guide to get the most out of this innovative and truly portable wireless audio device.
Main features
- True wireless stereo (TWS) earbuds with Smart Touch technology to play, pause, adjust volume, skip tracks and answer or hang up calls just with a simple tap
- 12 hours of total playback time and approximately 80 hours in standby mode**
- Feature a built-in microphone for taking calls with clear sound quality
- The sleek and compact magnetic charging dock is equipped with LED charging status lights and a 300mAh battery capable of providing enough energy to last up to 2 recharge cycles of up to 4 hours each*
- Lightweight and compact in size, each earbud is equipped with a 30mAh polymer battery with long lasting capability
- Ultra compact and slim design made of robust materials and a rubberized slip-resistant finish to withstand daily use
* Battery run time can last for 4 hours per charging cycle (2) for a total of up to 12 hours combined.** Estimated battery run time depending on usage and volume settings.
Package content
- Wireless earbuds (2)
- Magnetic charging case (1)
- Micro USB charging cable (1)
- User Manual (1)
Product overview
- Magnetic charging case: Place each earbud in the corresponding left and right side to recharge. The earbuds will turn on, synchronize and enter into pairing mode as soon as they are taken out of the charging case.
- Charging case LED indicator: It blinks consecutively in white indicating that the device is being charged. The light will stop blinking and stay solid white once it is fully charged.
- Charging port: Insert the Micro USB cable in this port to charge the battery.
- Earbuds with On/Off-Multifunction soft button: Touch this soft button for power, music and phone call management.
- Earbuds LED indicator
| Status | Function |
| Charging | The LED turns solid red |
| Charging complete | The LED turns off |
| Power On | The earphones will blink blue momentarily as they sync with each other automatically and then will enter into mobile pairing mode. |
| Power Off | The LED lights flash red, then turns off. |
| Pairing mode active | The LED on one of the earphones will randomly blink blue, while the other one will blink red and blue, alternatively. |
| Bluetooth® wireless pairing | Only the blue LED will blink once every 5 seconds in both earphones. |
| Low battery | A voice message will be heard indicating the battery level is low. |
| Incoming call/ Dialing | Blue LED lights up once every 5 seconds |
| Phone is on active call | Blue LED lights up once every 5 seconds |
Basic operation
Charging the case and earphones
- To charge the case, plug the supplied USB cable into a power source and the micro-USB end in the case’s port. The case starts charging automatically.
- Charging the case battery to its full capacity may take about 1.5 hour.
- When the battery is fully charged, the LED indicator lights will become solid white.
- While the earbuds are being charged, the red indicator on each side lights up. When fully charged, the LED will change to solid blue. This process will normally take about an hour.
- The fully charged buds have power for up to 4 hours of talking time or up to 80 hours of standby time. However, these times may vary depending on the mobile device used, on the usage profile, and on the calling/ listening habits of each individual user.
Turning your earbuds on or off
- The earbuds will automatically turn on as soon as they are taken out from the charging case. As they are equipped with TWS technology they will start synchronizing with each other and pairing at the same time, as well.
- If you have the earbuds on you and they are turned off, you need to touch the soft button for about 3 seconds to turn them on. A tone will be heard alerting of this event.
- To turn the earbuds off, touch the soft button for about 5 seconds again. A tone will be heard and the LED will turn off on both sides upon shutting off.
Advanced operation
TWS pairing
- Simply take the earbuds out of the charging case, or turn them on as it has been instructed previously. The earphones will blink blue momentarily as they sync with each other automatically, and then enter into mobile pairing mode.
Pairing your earbuds with a mobile device
- Simply take the earbuds out of the charging case, or turn them on as it has been instructed previously.
- Set your Bluetooth® phone to “discover” the wireless earbuds.
- Place the phone and earbuds within one meter of each other.
- After both earbuds have synchronized with each other, the LED light on one of the earphones will randomly blink blue, while the other one will blink red and blue alternatively to indicate that they have entered into pairing mode.
- Select the KTE-005 earbuds from the list of newly discovered devices in your phone.
- Accept by pressing Yes or OK on the device. If prompted, enter the passkey 0000 (4 zeros). Your device will confirm when pairing is complete.
- A tone will be heard when the devices are able to establish the wireless connection, and the LED will change to blinking blue.
- If after 60 seconds the pairing process fails, please repeat steps 1 through 6 as described above. Note: If for some reason your earbuds do not synchronize or become disconnected during use, turn both earbuds off and on again by pressing and holding the soft button for 3 seconds. If they still can’t get connected put them back in the case and remove them again. You can also press and hold the soft button for about 9 seconds to reset the earphones.
- The earbuds will automatically go into standby mode after a short period of inactivity to save battery life.
- You only need to pair the earbuds with your phone once, as it will re-pair automatically.
- The automatic re-pairing feature will allow the earbuds to be reconnected after being switched back on or when placed again within wireless range.
Call management using your wireless earbuds
- When there is an incoming call, your phone will ring, the blue LED will blink once every 5 seconds, accompanied by a tone through your earbuds.
- Touch the right or left button softly to answer the call. You may also press the answer button on your cellular phone to receive the incoming communication in your earbuds. Note: Audio will be out from both earbuds.
- To end a call, simply touch the right or left button softly once again.
- To reject an incoming call and send the caller to voicemail, press and hold the left or right button for about 2 seconds.
Music playback and voice command using your wireless earbuds
- Touch the soft button twice on any earbud to play and stop audio playback.
- When listening to music, touch the left soft button for 1.5 seconds to go to the previous track, and press the right soft button for 1.5 seconds to go to the next track.
- To decrease the volume briefly touch the left button of the earbuds. To increase the volume briefly touch the right button.
- Touch the left button three times to activate the voice assistant function.
Precautions
- Your earbuds are powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers designated for this device.
- Unplug the USB charger from the source when not in use.
- Parts of the earbuds are magnetic. Metallic materials may be attracted to the earbuds. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.
- Do NOT drop, hit or shake the device.
- Do NOT disassemble, repair or modify the earbuds yourself.
- Do NOT use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
- Do NOT expose the earbuds to excessive heat or to direct sunlight for long periods of time.
- Do NOT store the device in a place with high humidity or dust.
Technical specifications
| MPN | KTE-005 |
| Type | True Wireless Stereo earbuds with portable charging case |
| Form factor | In-ear |
| Special feature | Smart Touch commands |
| Speaker | |
| Maximum power output (RMS) | 1mW |
| Frequency | 20Hz-20kHz |
| Impedance | Driver: 32Ω±15% |
| Sensitivity | Driver: 102±3dB |
| Microphone | |
| Form factor | Built-in |
| Directivity | Omnidirectional |
| Frequency | 70Hz-10KHz |
| Impedance | 100Ω |
| Sensitivity | -42db |
| Volume control | Yes (Smart Touch) |
| Connectivity | |
| Connection type | Bluetooth® V5.0 |
| Wireless RF frequency | 2.4GHz |
| Wireless range | Up to 98ft** |
| Battery | |
| Single earbud battery | 3.7VDC, 30mAh polymer battery |
| Charging case battery | 3.7VDC, 300mAh polymer battery |
| Charging case + earbud charging total time | About 2.5 hours |
| Battery charging time (earbuds only) | 1 hour |
| Battery charging time(charging case only) | 1.5 hours |
| Charging case cycles before battery runs out | 2 |
| Battery runtime time (earbuds only) | Up to 4 hours (at 50% volume level)* |
| Earbuds total run time (including cycles) | Up to 12 hours |
| Standby time | About 80 hours |
| Additional features | |
| Supported audio formats | A2DP, AVRCP, H-SP, H-FP |
| Dimensions (LxWxH) | 701×11.15×23.16mm |
| Weight | 0.4oz |
| Cable length | 12in |
* Battery run time can last for 4 hours per charging cycle (2) for a total of up to 12 hours combined. Estimated battery run time depending on usage and volume settings.**Range estimate is based on an area free and clear of obstacles and interference, and within the line-of-sight between both Bluetooth® 5.0 devices.
FCC statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
report this adFor more information, go to www.klipXtreme.com.KlipXtreme® is a registered trademark. All rights reserved.The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes, and is not to be construed as a claim to any rights pertaining to, sponsorship by, or affiliation with, those brands. Made in China.
References
[xyz-ips snippet=”download-snippet”]