Kwikset 99420-001 Aura Bluetooth Keypad Smart Lock User Guide
Parts List
Prepare the door and check dimensions
If drilling a new door. use the supplied template and the complete door drilling instructions available at kwikset.com/doorprep
A. Make sure your door is compatible. If you have a standard deadbolt mounted separately from the handle below it, your door is compatible.
B. Remove your existing deadbolt from your door.
C. Measure to confirm that the hole in the door is either 2-1/8″ (54 mm) or 1-1/2″ (38 mm).
D. Measure to confirm that the backset is either 2-3/8″ or 2-3/4″ (60 or 70 mm).
E. Measure to confirm that the hole in the door edge is 1″ (25 mm).
F. Measure to confirm that the door is between 1-3/8″ and 2″ (35 mm and 51 mm) thick.
Install the latch and strike
For Latch/Strike Bag
A. Extend the latch bolt.
B. Hold the latch in front of the door hole, with the latch face flush against the door edge.
C. Is the D-shaped hole centered in the door hole?
D. Install the latch.
E. Install the strike on the door frame.
Make sure the hole in the door frame is drilled a minimum of 1″ (25 mm) deep.
Install the exterior keypad
For Lock Bag
A. What is the diameter of the hole in the door?
B. Locate the screws for step 3D and keep them within reach.
C. Remove the mounting plate from the interior assembly.
D. Install the exterior keypad and mounting plate.
Install the interior assembly
For Lock Bag
A. Ensure the turnpiece shaft is pointing up, and remove the interior cover and battery pack from the interior assembly.
B. Install the interior assembly onto the mounting plate.
Install the batteries and perform the door handing process
This step will teach your lock the orientation of your door and is crucial to lock operation.
A. Install 4 AA batteries in the battery pack.
B. With the door open, install the battery pack to initiate auto-handing.
C. The latch will retract and extend to learn the orientation of the door.
D. The Status LED will indicate success or failure.
Test the lock and check door alignment
If your door does not lock and unlock smoothly, make sure you replaced your previous latch and strike with those supplied in the box. If you still experience locking errors, complete the troubleshooting steps at www.kwikset.com/aura/supportKwikset Support: 1-800-327-5625
Install the interior cover
For lock Bag
Important Information about the interior cover
Cover Installation
Battery Pack Access
Download the app and create an account
The Kwikset app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.
A. Download the Kwikset app by scanning the QR code or visiting www.kwikset.com/app on your smartphone.
B. Create your account and follow the setup instructions in the Kwikset app.
Aura at a Glance
Status LED colors
These features can be adjusted in some smart home apps.
Manual Door Handing
If needed, the door handing process can be initiated manually. This is useful if the lock is being moved to a different door.
SmartKey Re-Keying
Re-key the lock to work with your existing key. See the supplied SmartKeyRe-key instructions for more information.Note: If Auto-Lock is enabled, remove the battery pack before re-keying your lock.
System Alerts
Troubleshooting
A complete Aura Bluetooth Keypad Programming and Troubleshooting Guide is available at www.kwikset.com/aura/support
Factory Reset
Factory Reset will delete all Bluetooth pairings, user associations, remove the lock from the account and reset all lock settings including handing.
Important Safeguards
- Read all instructions in their entirety.
- Familiarize yourself with all warning and caution statements.
- Remind all family members of safety precautions.
- Protect your user codes.
- Dispose of used batteries according to local laws and regulations.
WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.
©2021 Spectrum Brands, Inc. All Rights Reserved. Lake Forest, CA 92610.
[xyz-ips snippet=”download-snippet”]