LAMAX Trims1 Wireless Headphone User Guide

LAMAX Trims1 Wireless Headphone

Controls

Switch on Hold down multifunction button for

3 seconds

Switch off Hold down multifunction button for

5 seconds

Play  / Pause                 Press multifunction button
Next track Double-tap multifunction button on the

right earphone

Previous track Double-tap multifunction button on the

left earphone

Accept call                    Tap multifunction button
End call                         Double-tap multifunction button
Reject Call Hold down multifunction button for

2 seconds

Redial last number Triple-tap multifunction button
Activate mobile assistant                        Hold down multifunction button for

2 seconds

Switching onThe headphones turn on automatically when removed from the charging station. To switch on manually, hold down the multifunction button for 3 seconds. You must manually turn on both headphones separately. An alert is heard when the device is switched on.Switching offThe headphones switch off automatically when docked in the charging station. To switch off manually, hold down the multifunction button on both headphones for 5 seconds. An alert is heard when the device is switched off.

Pairing

  1. Remove the headphones from the charging station. The headphones will connect to each other automatically and an alert will sound. The headphones will be ready for pairing. This is indicated by the alternating flashing of the white and green LEDs.
  2. Turn on Bluetooth on your device and search for LAMAX Trims1 in the list of available Bluetooth devices. An audio alert will sound once the device and headphones have been successfully paired.If you encounter any problems while attempting to pair the headphones with a device, remove the headphones from the charging station. Remove the headphones from the list of paired devices on your phone. Then, insert the headphones into the charging station and pair according to point 1.

ChargingTo recharge the charging station, connect the cable to the USB-C port on the back of the charging station and connect the other end of the cable to a USB power supply with a maximum voltage of 5V. When charging, the LED will flash green. It will show a steady green glow when fully charged. To charge the headphones, dock them into the charged charging station. When charging, the LED in the headphones lights up green and the LED on the charging station lights up white. When the headphones are fully charged, the LEDs will deactivate.

Parameters

Wireless technology Bluetooth 5.0
Maximum pairing distance up to 10 meters
Supporting codecs AAC, SBC
Headphone battery capacity 60 mAh
Charging station capacity 400 mAh
Headphone charging time approx. 1,5 hours
Playback time up to 6 hours
Weight of each headphone 4 g
Weight including charging station 45 g

Printing errors reserved.The current version of the user manual can be downloaded here: https://www.lamax-electronics.com/downloads/lamax-trims1/manual

References

[xyz-ips snippet=”download-snippet”]