NEWSTAR Menu Board Ceiling Mount Instructions
This instruction is applicable to all the following models and related extended products
- NMPRO-CMB1 (With tilt arms)
- NMPRO-CMB2 (With tilt arms)
- NMPRO-CMB3 (With tilt arms)
- NMPRO-CMB4 (With tilt arms)
WARNING
- Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation.
- This products should only be installed by someone who has a basic knowledge of building construction installations and fully understand these instructions.
- Always have someone assist you to lift and position your equipment.
- Tighten screws and bolts firmly, but do not over tighten. Over tightening can damage the item and greatly reduce their ability to hold.Please refer to suggested torque values where applicable in these Instructions.
Parts List (NMPRO-CMB1)
- 1X
- 1X
- 1X
- 1X
1X
1X
1X
1X
Parts List (NMPRO-CMB2)
- 1X
- 1X
- 1X
- 1X
- 1X
1X
1X
1X
1X
Parts List (NMPRO-CMB3)
- X3
- X2
- X1
- X2
X3
X2
X1
X2
Parts List (NMPRO-CMB4)
- X1
- X3
- X1
- X3
X1Installation
[xyz-ips snippet=”download-snippet”]