Q ActiveQUICK START GUIDEFor models Q Active 200 & 400
Package contents
Full manual available at: www.qacoustics.co.uk/brochures
Safety information and warnings
Notices
1.1 FCC Statement (For US Customers)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
1.2 FCC Radiation ExposureThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 8 in/20cm between the radiator and your body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.CAUTION! Any changes or modifications made to this device that are not expressly approved by Q Acoustics may void the user’s authority to operate the equipment.1.3 Industry Canada Statement (for Canadian Customers)CAN ICES-3 (B)/NMB-3(B)The device meets the exemption from the routine evaluation limits set out in section 2.5 of RSS 102 and is in full compliance with RSS-102 RF. Users can obtain information on RF exposure and compliance from Industry Canada.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:1) This device may not cause harmful interference, and2) This device must accept any interference received, including interference that may cause undesired operation.1.4 Bluetooth® This unit contains a Class 2 Bluetooth® transmitter working at 2.4GHz.
Instructions
Read and understand these instructions before you use your speakers.If damage is caused by failure to follow these instructions, the warranty does not apply. Please keep these instructions in a safe place.Read these instructions. Keep these instructions. Heed all warnings.Follow all instructions. Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers that produce heat.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.Use only with the stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Installation
- The mains plug is the means of disconnecting the unit from the mains supply and shall be readily accessible.
- Only use the accessories supplied with the unit.
- To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
- Never install this product in a confined space. Always leave a space or at least four inches around the product for ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
- Do not place any sources of danger on the apparatus (for example liquid filled objects, lighted candles).
- The use of apparatus is in tropical and/or moderate climates.
Moisture
- To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain, moisture, dripping or splashing.
- Do not use this apparatus near water.
Remote Control Battery
The remote control supplied with this unit contains a battery. To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:
- Install the battery correctly, + and – as marked on the unit.
- Remove the battery when the unit is not used for a long time.
- Do not expose the battery or remote control to excessive heat, including sunshine.
- CAUTION: Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
- WARNING – DO NOT INGEST BATTERY – CHEMICAL BURN HAZARD.
- If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention
Disposal of BatteriesThe battery supplied contains perchlorate material and in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations. The battery supplied does not contain the heavy metals mercury or cadmium.
Symbols used on this product
This symbol indicates that the unit has a Class II double insulation system, and no protective earth provided. This symbol indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove the product covering. The ‘exclamation mark’ calls attention to features for which you should read this manual closely to prevent operation and maintenance problems.WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture, and object filled with liquids, such as vases, should not be placed on this apparatus.CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
This symbol indicates that when the unit is to be discarded, it must be separated from other household-type waste and sent to separate collection facilities for recovery and recycling of electrical and electronic equipment.
STEP 1 – Position speakers
- Position the speakers in your room and select LEFT or RIGHT for the speaker position using the switch at the rear of the speaker:
- Set the Boundary Condition Switch to the correct position depending on the location of the speaker. The foam port bung supplied is optional for any of the boundary settings but is required when the speaker is positioned flat against a rear boundary:
These are suggested settings to help control the bass but spend some time listening and choose the switch position that best suits your personal listening preference.
STEP 2 – Power on speakers
- Connect power
- Turn on at the wall
STEP 3 – Setup hub
A. PowerB. Wi-Fi router (optional, cable not supplied)C. Digital and analog inputs (refer to full manual for detail)
- Connect all required inputs
- Connect power and turn on at the wall
Note: the hub can be placed anywhere in the room with the speakers mounted on a wall or even hidden in a cupboard.
STEP 4 – Hub initialisation
When the hub powers up, you will see a sequence of flashing LEDs on the front.Pair your remote by holding the ‘Remote pair’ button on your remote until the remote LED on the hub stops flashing and turns solid white (ensure 2 x AAA batteries supplied are fitted).
After three minutes the flashing LEDs will stop and you will be left with a solid red LED next to the Standby button.
If a solid red LED is not shown please refer to the full manual available online at www.qacoustics.co.uk/brochures.
STEP 5 – Download setup app
For Google Home users go straight to your Google Home App to configure your Q Active system. Once set up you can download the Q Active app at your convenience to access more control for your system.
For Amazon, Alexa users download the Q Active app via the App Store or Google Play market. Then follow the in-app instructions to connect to Wi-Fi.
For online video, setup tutorials visit our knowledge base at www.qacoustics.co.uk/kbNote: It is possible to return to the Wi-Fi setup for streaming music as Bluetooth ®, digital and analog inputs do not require this to be set up.
STEP 6 – Play music
The system will automatically wake from standby when music is detected. Control your speakers from your chosen app, or via the remote for any of the connected digital and analog inputs.
Remote controls:
Speaker controls:
report this ad
Warranty
Q Acoustics Media products are warranted free of defects in materials and workmanship for a period of 1 year from the date of purchase. During the warranty period, Q Acoustics will, at its option, repair or replace any product found to be faulty after inspection by the company or its appointed distributor or agent.Misuse and fair wear and tear are not covered by warranty.Goods for repair should in the first instance be returned to the supplying dealer. If this is not possible contact Q Acoustics or their appointed distributor for your area to determine the correct warranty procedure. If possible the original packaging should be used to return the product as damage sustained during transit to the repair center is not covered by the warranty. The warranty does not in any way affect your legal rights.Warranty can be extended to 2 years by registering your product at qacoustics.co.uk/register.For service information in other countries Visit: Qacoustics.co.ukQ ACOUSTICSArmour Home Electronics Ltd.Woodside 2, Dunmow RoadBishops Stortford, HertsCM23 5RGOur policy is one of continuous product improvement.We reserve the right to change the designs and specifications without notice.This document contains information that is subject to change without notice.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates
Google, Google Play, Chromecast, Chromecast built-in, Google Home, and other related marks and logos are trademarks of Google Inc. Chromecast built-in may require subscription(s).
This product incorporates Spotify software which is subject to 3rd party licenses found here: spotify.com/connect/third-party-licenses.
Being Roon Ready means that Q Acoustics network players transparently discover and connect to Roon without any configuration, and bit-perfect audio is delivered from Roon to your network player. Together, Roon and Q Acoustics deliver the power, flexibility, and performance of networked audio, with the easiest setup and highest reliability available.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and the use of such marks by Armour Home Electronics Limited is under license. Other trademarks and trade names are those of their respective owners.
The term HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
References
[xyz-ips snippet=”download-snippet”]