Portable Speaker SBX-412401BTS User Manual

Portable Speaker SBX-412401BTS User Manual

Definitions:

MODE: The MODE button allows you to toggle through and select the speaker functions of your choice: Bluetooth, USB, SD Card, AUX, FM Radio. : Press the Loop button to loop the current .mp3 track, play list, or shuffle.TWS: Press to play or pause the selected .mp3 track. Press and hold down the button for TWS Sync TWS. : Press to select the previous .mp3 track. In FM MODE, use this button to select the previous FM radio station.. : Press to select the next .mp3 track. In FM MODE, use this button to select the next FM radio station.FM Radio: Frequency-Modulated stations operate in a frequency band extending from 87.8 MHz to 108 MHz.MIC.PRIORTY: Press the MIC.PRIORTY button to prioritize the microphone over the music.TRS: Tip, Ring, Sleeve: A 3.5mm or 6.35mm balanced audio connector. Carries 2 balanced mono signals. Also known as 1/8” and 1/4”.TS: Tip, Sleeve: A 3.5mm or 6.35mm unbalanced audio cable. Also known as 1/8” and 1/4”.Instrument Cable: Unbalanced 6.35mm audio cable.RCA: An Audio/Video connection type: Radio Corporation of America (RCA).HDMI: High-Definition Multimedia Interface: Transmits digital audio and video signals.MP3: Compressed audio file typically 1/10th of a broadcast .wav file. MPEG Audio Layer-3.EQ: Equalizer: Use the EQ to boost or cut audio frequencies to shape the sound.LED: Light Emitting Diode: A semiconductor diode which glows when a voltage is applied.RGB: Light color values: Red, Green, Blue.USB: Universal Serial Bus: Used to transport digital information between digital components.TF Card: TransFlash card is used to carry digital information. Also known as a Micro SD Card.

QUICK SETUP GUIDE

Back Panel

Top Panel

6 – STEP SETUP GUIDE

  1. Plug the AC power cord to the SBX-412401BTS. You will find the connection terminal on the back panel.
  2. Find a power outlet (AC 120V/60Hz) and connect the AC cord to the socket to supply the unit with power.
  3. On the back panel there are two power switches, set the LED POWER and BALL LIGHT POWER to the “ON” position. Check the front side for of the SBX-412401BTS for flashing party lights. If the party lights are not on try a different power outlet.
  4. Move to the top panel and set the POWER switch to the “ON” position. The display screen should turn on. TheSBX-412401BTS should now be ready to play music.
  5. Insert a USB flash drive or SD card into the corresponding port, found directly under the display screen, to play your .mp3 content. The SBX-412401BTS will automatically read the .mp3 files when inserted.
  6. The MASTER VOLUME will increase and decrease the entire volume evenly. Make sure that the L and R Channel Knobs are turned to max before gradually raising the MASTER VOLUME.

SBX-412401BTS BLUETOOTHBluetooth Mode: Use the MODE button to enable Bluetooth on the SBX-412401BTS. Open the Bluetooth settings on your mobile device and search for QFX SBX-412401BTS. Select the option to pair both devices together. You can now sit back and enjoy the music from your favorite app. You won’t need reconnect the Bluetooth again when switching through modes.

SBX-412401BTS FM RADIO:FM Radio: Frequency-Modulated stations operate in a frequency band extending from 87.8 MHz to 108 MHz. Use the MODE button to select the FM mode. In FM mode, press and hold the Play/Pause button to scan availble frequencies in the area. Extend the telescoping antena to enhance reception.

SBX-412401BTS Recording FunctionInsert a USB or SD card in the slot. Connect a wired microphone and set the desired volume level. Press and hold the “REC/PLAY ” Button to start recording. Press the “REC/PLAY” button again to playback the recording. To exit the recording function press “REC/PLAY” again.

IMPORTANT SAFETY MEASURES

Before using this machine, please read all the safety and operating instructions. These safety and operating instructions should be kept in condition of consultation.

  1. Electric Power Supply Line: Keep the power cord safe from being tramped on, pressed on by heavy objects, or pierced. Make sure that the cord has ample space to rest on the ground and is not stressed. DO NOT pull or drag or the power supply line.
  2. Ventilation: This unit must be set in a ventilated space. DO NOT cover the vents on the back panel for any reason. If placed alongside a wall, distance the unit a minimum of 10cm to allow air flow. DO NOT surface that might restricted good air flow.
  3. Dismantling: DO NOT dismantle or open the unit. This is a high powered unit that can cause serious harm if tampered with. DO NOT Open.
  4. Smoke: Please unplug the power supplies cord from the wall outlet immediately if unsual smoke appears and contact customer support.

GLOBAL FUNCTIONS:

MODE: The MODE button allows you to toggle through and select the speaker functions of your choice: Bluetooth, USB, SD Card, AUX, FM Radio.: Press the Loop button to loop the current .mp3 track, play list, or shuffle. TWS: Press to play or pause the selected .mp3 track. Press and hold down the button for TWS Sync (See TWS Connection instructions).: Press to select the previous .mp3 track. In FM Mode, use this button to select the previous FM radio station.: Press to select the next .mp3 track. In FM Mode, use this button to select the next FM radio station

SBX-412401BTS DISPLAY SYSTEM SETTINGS

  1. Mode: The LED display screen will display mode information: USB/SD/BLUE/LINE/FM RADIO. When a USB flash drive/SD Card is inserted into the USB/SD input, the unit will automatically switch to USB/SD mode and begin playing .mp3 audio files.
  2. Track Number: The current track playing.
  3. FM Mode: All FM channels display here. Press “Play/Pause/TWS” button to auto scan all FM Radio channels.

TWS CONNECTION

  1. TWS connection: TWS Connection is only for two speakers of the same make and model.
  2. Enable Bluetooth: Turn on both speakers and set them to BLUETOOTH mode.
  3. TWS Sync: On one unit press and hold the Play/Pause (TWS) button for 3 seconds. The two speakers should connect together.
  4. Mobile Device: Open the Bluetooth settings on your mobile device and search for QFX SBX-412401BTS. Select the option to pair both devices.
  5. Music Playback: Select music from the phone and enjoy True Wireless Stereo.
  6. Exit TWS: Press and hold the Play/Pause/(TWS) button for 3 seconds to exit the TWS function.

MIC.PRIORTY:

Press the MIC.PRIORTY button to prioritize the microphone over the music.

Mic Input: Insert a 6.35mm (TS) Mic cable.Mic Volume: Increase and decrease Mic volume gain.Guitar Input: Insert a 6.35mm (TS) instrument cable.Guitar Volume: Increase and decrease Gtr volume gain.Bass EQ: Boost or cut 15dB.•Microphone•Guitar•MasterMid EQ: Boost or cut 15dB.•MicrophoneTreble EQ: Boost or cut 15dB.•Microphone•Guitar•Master5 Band Graphic EQ: Boost or Cut 10dB @ 100hz, 300Hz, 1kHz, 3kHz, 10kHzEcho: Add Echo to the MicrophoneRCA Inputs: Stereo RCA Input. Left and Right Auxilary Input: 3.5mm inputLighting Sensitivity: Dim or Brighten the lightsPower: ON/OFF switchDisplay Screen: Displays current mode informationUSBPort: Insert a USB deviceSD Card Port: Insert an SD CardGlobal Controls:•Mode: Toggle through USB/SD/BLUE/LINE/FM RADIO.•Loop: Loop one track, all tracks, or Shuffle•Play/Pause/TWS: Play or Pause Track. TWS Sync•Rewind: Previous Track or FM Station•Forward: Next Track or FM Station•Rec.Play: Record to a USB or SD CardMic.Priority: Enable Microphone PriorityInput: Enable USB or RCA/Aux InputL-Channel: Left Channel volume controlR-Channel: Right Channel volume controlMaster Volume: Master volume control

SBX-412401BTS BACK PANEL

RCA Input: Stereo inputRCA Output: Stereo outputBall Light: ON/OFFAC Power: 120V, 60HzLED Power: ON/OFFAntenna: Telescoping Antenna

SBX-412401BTS REMOTE CONTROL

  1. Mute: Mute the audio
  2. STANDBY: Enable standby mode.
  3. Scan: Scan folder or FM Station
  4. Number Keys: 0-9
  5. Mode: Toggle between USB, SD, FM, LINE, BT
  6. REP: Repeat the playing track
  7. USB: Press to select USB or SD Card.
  8. AUX: Select AUX mode (back panel only)
  9. FM: Press to select FM mode
  10. Rewind: Select previous track or FM channel
  11. Forward: Select next track or FM channel
  12. PLAY/PAUSE: Play or Pause current track
  13. EQ: Enable
  14. VOL+: Increase the master volume
  15. VOL-: Decrease the master volume

WHERE THE PARTY STARTS

  1. Fog Machine Switch: ON/OFF switch. If not in use, please turn the fog machine OFF.
  2. LED Light: When the fog machine reaches the temperature to produce smoke, it will illuminate. Wait for the light to turn on before attempting to produce smoke
  3. Controller Input: Connect the wired controller to fog machine terminal for use. The SBX -412401BTS also comes with a wireless transmitter and receiver to enjoy deploying fog wirelessly.

Getting the Fog Machine Ready

  1. Fill up the bottle with fog juice.
  2. Connect the the Fog Machine controller or wireless receiver to the back panel controller input
  3. Turn ON the Fog Machine and wait for LED light indicator to turn ON.
  4. Press the Fog Machine button on the controller to release the Fog.
[email protected]

Portable Speaker SBX-412401BTS User Manual – Portable Speaker SBX-412401BTS User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,