SOUNDPEATS H1 True Wireless Earbuds User Manual

Table of Contents

SOUNDPEATS H1 True Wireless Earbuds User Manual

Package Content

Specifications

Bluetooth Version	5.2
Bluetooth Chip	Qualcomm® QCC3040
Maximum Working Range	10m
Talking Time	About 10 hours
Earbuds Charging Time	About 1.5 hours
Charging Case Charging Time	About 2 hours
Charging Case Recharge Earbuds	3 times
Dimension (L * W * H)	23.620.727.2mm（earbud）

Product Diagram

Controls

Power On	Automatically: Take out the earbuds from charging case Manually: Long press the multifunction button for 1.5s
Power Off	Automatically: Place the earbuds back into the charging docks and close the charging case Manually: Long press the multifunction button for 10s
Play/ Pause	Double click the multifunction button
Volume –	Click the left multifunction button once
Volume +	Click the right multifunction button once
Previous Track	Long press the left multifunction button for 1.5s
Next Track	Long press the right multifunction button for 1.5s
Answer /Hang Up Phone Call	Double click the multifunction button
Reject Phone Call	Long press the multifunction button for 1.5s
Switch Between Two Active Calls	Long press the multifunction button for 2s
Enter Pairing Mode Manually	Long press the multifunction button for 6s
Activate Voice Assistant	Triple click the multifunction button on right earbud
Game Mode	Triple click the multifunction button on left earbud

Wearing the Earphones

Identify the left and right earbuds.
Rotate the earbuds, and adjust to find the best angle.

Getting Started

Pairing and Re-Pairing

When the charging case is powered, open the charging case and take out the earbuds simultaneously , then both earbuds will enter TWS pairing mode automatically. You will hear a voice prompt when the left and right earbuds connect to each other successfully.After this, the indicator for secondary earbud stays on and indicator for main earbud flashes in red and white alternately with a voice prompt “Pairing” indicating the earbuds enter pairing mode.
“SOUNDPEATS H1” will show up on the Bluetooth list, click it to connect. You will hear a voice prompts “connected” when the earbuds connect with your device successfully.
SOUNDPEATS H1 Bluetooth earbuds can remember previously paired devices. When you make the second connection, simply activate the Bluetooth in your device, take out the both earbuds from the charging case.They will connect to each other, and reconnect to your device automatically. If the earbud doesn’t automatically connect to your device, please activate the Bluetooth in your device and hit “SOUNDPEATS H1” on the Bluetooth list.
Mono Mode: After successfully pairing of SOUNDPEATS H1, the left and right earbud can be used separately.

Note:If you want to change the pairing device in the connected state, long press the multifunction button for 6s after power off the earbuds to have it enter pairing mode directly and pair to a new device.

Game Mode

SOUNDPEATS H1 uses the latest technology and is equipped with game mode. In the game mode, earbuds delay will be greatly reduced to ensure the synchronization of the game audio and picture.Triple click the multifunction button on left earbud to turn on/off the game mode. The earbud prompts “Game Mode” when the mode is on, and prompts “Exit Game Mode” when it’s off.

Factory Reset

(Try the following steps if you fail building connection between two earbuds, or between earphones and device)

Clear pairing record between the earbuds and all your devices.
Place back both earbuds into the charging docks and make sure the earbuds are charging properly. Then long press the multifunction buttons of both earbuds for 10s until the LED light of the both earbuds flash white twice indicating reset successfully.

Charging

SOUNDPEATS H1 Bluetooth earphones are equipped with a charging case which can not only charge the earphones, but also a case that is convenient to carry and store the earphones. Built-in rechargeable battery, can charge two earphones 3 times.

Charging the headset

The earphones are partially charged at the factory.Please make sure they are fully charged before first use.

Put the earphones into corresponding charging docks and make sure the connectors for charging are connected properly.
The LED indicator lights up indicating that the earphones start to charging.
The LED indicator light goes out after fully charged

Charge the case

When charging case battery is low, the LED indicator of the charging case is in red. Please charge the case soon.

Connect the charging port with Type-C charging adapter. (Please make sure the current is not greater than 1A)
Please charge the case at least once every 3 months when not in use for a long time.

Warranty and Support

We warrant this device 12 MONTHS from date of the original purchase for manufacturer defects. [email protected] www.soundpeatsaudio.comPlease scan the QR code to check the detailed PDF manual in more details.

https://soundpeatsaudio.com/downloads/

Qualcomm

Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries.Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.