T2USER MANUAL
Package Content
Specifications
Bluetooth Version | 5. |
Mccgdmurn Working Range | 10m |
Working Time | About 10 hours |
Charging Time For Earbuds | About 2 hours |
Charging Time For Charging Case | About 2 hours |
Charging Case Recharge Earbuds | Twice |
Dimension(L*W*H) | 21.4*21.7*27.7mm (earbuds) |
Product Diagram
Controls
Power On | Automatically: Open the charging caseManually: Long press the multifunctional button for 1.5s |
Power off | Automatically: Place the earbuds back into the charging docks and close the charging caseManually: Long press the multifunctional button for lOs |
Play/Pause | Double click the multifunctional button |
Volume- | Click the left button once |
Volume+ | CI ck the right button once |
Next Track | Long press the right button for 1.5s |
Answer/Hang Lip Ftione Call | Double click the multifunctional button |
Reject Phone Call | Long press the multifunctional button for 1.5s |
Switch Between Two Active Calls | Long press the multifunctional button for 2s |
Manually Enter Pairing Model | Long press the multifunctional button for 6s |
Activate Voice Assistant | Triple-click the multifunctional button |
Smart Noise Cancellation | Long press the left button for 2s |
Transparency Mace! | Long press the left button for 2s |
Wearing
- Identify the left and right earbuds.
- Rotate the earbuds, and adjust to find the best angle.
Getting Started
Pairing and Re-Pairing
- When the charging case is powered, open the charging case, then both earbuds will enter TWS pairing mode automatically. You will hear a voice prompt when the left and right earbuds connect to each other successfully.After this, the indicator for the secondary earbud stays on and the indicator for the main earbud flashes in blue and white alternately with a voice prompt“Pairing” indicating the earbuds enter pairing mode.
- “SOUNDPEATS T2” will show up on the Bluetooth list, click it to connect. You will hear a voice prompts“connected” when the earbuds connect with your device successfully.
- soundpeats T2 Bluetooth earbuds can remember previously paired devices. When you make The second connection, simply activate the Bluetooth in your device, take out both earbuds From the charging case. They will connect to each other, and reconnect to your device automatically. If the earbud doesn’t automatically connect to your device, please activate the Bluetooth in your device and hit“SOUNDPEATS T2” on the Bluetooth list.
- Mono Mode: After successfully pairing SOUNDPEATS T2, the left and right earbud can be used separately.
Factory Reset
(Try the following steps if you fail to build a connection between two earbuds,or between Earphones and device)
- Clear pairing record between the earbuds and all your devices.
- Place back both earbuds into the charging docks and make sure the earbuds are charging properly. Then click the multifunction buttons of both earbuds 5 times until the LED light of both earbuds flashes blue and white twice indicating reset successfully.
Charge
SOUNDPEATS T2 Bluetooth earphones are equipped with a charging case that can not only Charge the earphones, but also a case that is convenient to carry and store the earphones.A built-in rechargeable battery can charge two earphones Twice.
Charging the headset
The earphones are partially charged at the factory. Please make sure they are fully charged Before first use.
- Put the earphones into corresponding charging docks and make sure the connectors for Charging are connected properly.
- The LED indicator lights up in blue indicating that the earphones start to charging.
Charge the case
When using the charging case to charge and it didn’t indicate in blue, please charge the case soon.
- Connect the charging port with a Type-C charging adapter. (Please make sure the current is not Greater than 1A) the indicator flashes are in white. When the charging case charge until full status, the LED indicator light will be normal after being fully charged.
- Please charge the case at least once every 3months when not in use for a long time.
Warranty and Support
We warrant this device 12 MONTHS from the date of the original purchase for manufacturer defects.[email protected]
Qualcomm
Qualcomm aptX, Qualcomm TrueWireless, and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries.Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit difierent from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
FCC ID: 2AFTU-DD016MADE IN CHINA
References
[xyz-ips snippet=”download-snippet”]