Tag: ULINE
-
ULINE H-3437 Electrical Plug Prong Lockout User Manual
ULINE H-3437 Electrical Plug Prong Lockout User Manual OPERATION Fits two prong plugs with or without ground. Can be used with lockout padlocks or lockout hasps. Insert the plug prongs with or without ground. (See Figure 1) NOTE: Insert fully to push out eyelet. (See Figure 2) Insert the padlock and lock. (See Figures 3-4)…
-
ULINE H-3438 Universal Wall Switch Lockout Installation Guide
ULINE H-3438 Universal Wall Switch Lockout Installation Guide PARTS INSTALLATION CHANGING DUAL-PURPOSE SWITCH SLIDES Slides have the words “TOGGLE” and “ROCKER” molded on opposite When “TOGGLE” appears through the cover, the lockout device is set for a toggle-style switch. (See Figure 1) When “ROCKER” appears through the cover, the lockout device is set for a…
-
ULINE H-5616 Safety Swing Gate Installation Guide
H-5615, H-5616 1-800-295-5510SAFETY SWING GATEuline.com Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or death. Retain instructions for future reference. Assembly and installation of the…
-
ULINE H-7605 Monitor Arm Installation Guide
H-7605 MONITOR ARM1-800-295-5510uline.com TOOLS NEEDED HARDWARE INSTALLATION NOTE: Monitor arm includes hardware to attach to a wall or Uline Deluxe Workstations and Packing Stations. UPRIGHT MOUNTING Align monitor arm mounting bracket upright at the desired height. Secure to upright with two M6 x35 mm or M6 x 50 mm Allen head bolts, two 6.4 x…
-
ULINE H-3878 Slatwall Cube Tower Installation Guide
H-3878SLATWALL CUBE TOWER 1-800-295-5510uline.com TOOLS NEEDED PARTS ASSEMBLY KICK BASE ASSEMBLY Install camlock pins into the predrilled holes in kick base boards using screwdriver. (See Figure 1) Install camlocks into large holes in kick base boards by tapping them into position with rubber mallet. (See Figure 2)NOTE: Ensure the hole in the side of the…
-
ULINE H-3439, H-3440 Circuit Breaker Lockout Instructions
H-3439, H-3440CIRCUIT BREAKER LOCKOUT1-800-295-5510uline.com INSTRUCTIONS H-3440 STANDARD CIRCUIT BREAKER LOCKOUT Move breaker to off position. Open red handle of lockout. (See Figure 1) Place lockout over breaker toggle. Turn the black knob of the lockout clockwise until grips touch toggle. Do not overtighten. When the handle is closed, the grips will tighten against the toggle.…
-
ULINE H-4810, H-4811 Locker Locks Installation Guide
H-4810, H-4811LOCKER LOCKS 1-800-295-5510 – uline.com TOOLS NEEDED INSTALLATION Above the handle on the front of the locker, locate the three circular indents. The middle circle will be larger than the top and bottom circles. (See Figure 1) Open door. From inside, remove the two nuts and washers holding on the steel plate using a…
-
ULINE H-5501 Heavy Duty 5 Channel Cable Protector Instructions
H-5501 HEAVY DUTY 5 CHANNEL CABLE PROTECTOR1-800-295-5510uline.com INSTRUCTIONS COMPONENTS ASSEMBLY Interlock with dog-bone connectors to extend protection length. (See Figure 1) Inspect areas for safety hazards. Assemble sections by aligning female connectors over male connectors and press with the foot to secure. Open the cover and install cables down into channels. Close cover flush with…
-
ULINE H-7799 Outdoor Bluetooth Padlock User Guide
ULINE H-7799 Outdoor Bluetooth Padlock USAGE UNLOCK WITH KEYPAD Enter Primary Code by pressing the corresponding directions on lock keypad.NOTE: Do not pull on the shackle when entering code. When lock lights green, open within five seconds or it will relock. UNLOCK WITH MOBILE DEVICE On mobile device, visit app store and download the free…
-
ULINE H-842U-30, H-844-30, H-1084U-30, H-1085U-30 8-11 Step Rolling Safety Ladder Installation Guide
H-842U-30, H-844-30, H-1084U-30, H-1085U-30 8-11 Step Rolling Safety Ladder H-842U-30, H-844-30 H-1084U-30, H-1085U-308-11 STEP ROLLING SAFETY LADDER30″ DEEP TOP STEP 1-800-295-5510uline.com Exclusive to ladders sold in California only. NOTE: Ladders shipping to California with a platform height over 48″ will include a 42″ handrail to comply with OSHA regulations. # DESCRIPTION QTY. ULINE PART NO.…
