TELLDUS Remote Controlled Indoor Outlet User Manual

TELLDUS Remote Controlled Indoor Outlet

You can also read the manual online. Just follow the link: telld.us/m14190

Connect to a remote control*

* Remote Control only included in selected packages

Connect sensor to TellStick

Requires a TellStick and a Telldus Live account

Read this before installation

Remote controlled outlets & remote control

• Remote control* has 3 channels and 1 group function.• Each outlet has 5 memory settings.• Blue LED indicates ON/OFF and programming status.

Installation

• Remove the plastic tab from the battery in the remote control*.• Connect the outlet to mains power.• Connect a lamp to the outlet. If there is a power switch on the connecting cable make sure it is switched on.

Unpair a single remote control* from an outlet:

• Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.• Press the corresponding OFF button on the remote control* to remove the learned code (the learning mode is automatically disabled after 15 seconds if no button is pressed).• The connected lamp blinks three times as confirmation.

Unpair all remote controls* from an outlet:

• Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.• Within 7 seconds, press the button briefl y once more (the learning mode is automatically disabled after 15 seconds if no button is pressed).• The connected lamp blinks three times as confirmation.

Specifications

  • Article number: 14190
  • Battery: 3V CR2032
  • Max resistive load: 3680 W
  • Range: 0-30m
  • Protection class: IP20
  • Protection class: I
  • Frequency: 433.92 MHz
  • Operating temperature: 0°C–35°C
  • Power supply: 230 V~, 50 Hz
  • Standby power: <1 W

Correct disposal of the productsWithin the European Union, this symbol indicates that the products must not be disposed of in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose of the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.

Proove AB Birger Svensson Väg 34 B, 432 40 Varberg, Swedenwww.telldus.comsupport.telldus.com

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by