TSW100Quick Start Guide v1.4
Wiki knowledge base
https://wiki.teltonika-networks.com/
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
| Technical specifications | |
| Input voltage range* | 7 – 57 VDC |
| Max power consumption no PoE devices connected | <9 W |
| Max PoE power budget at PSE** | 120 W |
| Max Ethernet cable length | 100 m |
| Bundled accessories specifications*** | |
| Power adapter | Input: 1.8 A @100-240 VAC, Output: 50 VDC, 1.3 A, 4 pin plug |
* PoE operates properly only when connected power supply outputs 44 V or higher voltage.** Provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE >130 W power supply must be used*** Order code dependent.
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW100 LAN port number 5.
- Connect end devices (ex. IP camera) to TSW100 1 to 4 port, which you want to power via Ethernet.
- Connect 4 pin power plug to TSW100 to power up switch.
SAFETY INFORMATION
TSW100 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Hereby, TELTONIKA NETWORKS declares that this TSW100 is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU.
Instruction Manual: Connect the power adapter to turn on the device. More information on https://wiki.teltonika-networks.com/
This sign means that all used electronic and electric equipment should not be mixed with general household waste.
This sign means that the product meets the requirements of the applicable EU directives.
The full text of the EU declaration of conformity is available at the followingInternet address: https://wiki.teltonika-networks.com/view/TSW100_CE
report this ad© 2021 Teltonika Networks
References
[xyz-ips snippet=”download-snippet”]