TicWatch S2/E2
Accessories and Appearance S2 / E2
Included in the box are the TicWatch smartwatch, a magnetic contact charger and a product manual.
Crown:Long press while powered off: power onLong press while powered on: activate The Google Assistant1-Click while powered on click: app menu
Screen:1.4 inch full round dialResolution:400×400 pixels
Strap Width:22mm
Getting Started With the TicWatch S2/E2
- Pairing with the Wear OS by Google App
- Download and install the Wear OS by Google app from the Google PlaystoreTM or Apple App Store.
- Pair your smartphone with the Wear OS by Google app by following these steps:
- Press crown on the smartwatch to turn it on.
- Select your language.
- Turn on the Bluetooth through your smartphone and open the Wear OS by Google app. Follow the instructions within this app to pair your smartphone with your smartwatch.
- Pair with the Mobvoi app
- By linking the Mobvoi app to your phone, you can synchronize data with your phone and access other functions. How to pair:
- Pair your Ticwatch with the Wear OS by Google.
- Download the Ticwatch app from the Google Playstore or the Apple App store.
- Start the pair process.
- By linking the Mobvoi app to your phone, you can synchronize data with your phone and access other functions. How to pair:
iPhoneWhen your smartwatch is successfully paired with the Wear OS by Google app, you need to pair with the Ticwatch app again to synchronize the data from your smartphone.
- Instructions:
- Pair your smartwath with the Wear Os by Google app and go to the Ticwatch app. Log in or create a new Mobvoi account and click on start.
- Select your smartwatch name on your phone and let the pair process begin. (You can find the smartwatch name under Settings> System> About)
- Click “OK” when the devices are paired.
AndroidWhen your smartwatch is paired with the Wear OS by Google app, you download the Ticwatch App and log in with an existing account or create a new one. The app should immediately report that the devices are paired. You do not need to pair again.
Important: You must first pair your smartwatch and smartphone with the Wear OS by Google app. When this is successful you pair with the Ticwatch app. The other way around does not work. It is also important that you do not follow these steps via the Bluetooth interface.
Your smartphone must use Android 4.4 or higher and / or iOS 9.0 or higher. When your smartphone and smartwatch are connected successfully, it will display “connected”.
If you can not successfully pair, the smartwatch can not be used. Reset the smartwatch and restart it. Restart your smartphone and turn the Bluetooth on again and restart the pair process.
Pair more smartwatches to your phoneIf you like, you can pair multiple smartwatches to your smartphone. Note: You can’t do this with an iPhone. But you can only pair your watch with one phone at a time.If you have more than one phone that you want to pair with your smartwatch, or you own multiple smartwatches, keep in mind:
One smartwatch and multiple phonesYou can’t pair one watch with multiple phones at the same time. You can switch which phone your watch is paired with, but you need to reset your watch to factory settings first. Then you can pair your watch to the new phone.
Multiple smartwatches and one phoneNote: You can’t do this with an iPhone.You can pair multiple smartwatches to a single phone. Simply repeat the pairing steps for each smartwatch. Below the smartwatch you’ll see if it’s connected or disconnected. Your smartwatch will be disconnected if it can’t communicate with your phone or if you’ve chosen to disconnect it from the settings.
Trouble pairing existing watch to a new phoneYou can pair an existing smartwatch with a new phone, but you need to reset your watch to factory settings first. Then you can pair your smartwatch.
Connect to Wi-FiYour watch can automatically connect to saved Wi-Fi networks when it loses the Bluetooth connection with your phone.
- If your screen is dim, tap it to wake up the smartwatch.
- Swipe down from the top of the screen.
- Tap Settings. If you don’t see it right away, swipe left and tap Settings.
- Turn on Wi-Fi. Scroll down and tap Connectivity. If Wi-Fi is set to off, tap Wi-Fi to switch it to Automatic.
Add or change your watch’s Wi-Fi network
- If your screen is dim, tap it to wake up the watch.
- Swipe down from the top of the screen.
- Tap Settings. If you don’t see it right away, swipe left and tap Settings.
- Set up the new network. Scroll down and tap Connectivity and then
Note: To enter a password if a password is required, tap Enter on phone. When prompted, enter the password on your phone. Then tap Connect.Note: Your watch can’t connect to Wi-Fi networks that take you to a page before you can connect (for example, Wi-Fi networks at places like hotels or coffee shops).
Connect to known networksAs long as your smartwatch’s Wi-Fi is on, it’ll connect automatically to Wi-Fi networks saved in your phone. Note: This doesn’t work on iPhones.
Connect Bluetooth devices to your smartwatchYou can pair Bluetooth accessories, such as headphones or a
- If your screen is dim, tap the screen to wake up the watch.
- Swipe down from the top of the screen.
- Tap Settings and then Connectivity and then Bluetooth and then Available devices.
- Your watch will search for nearby devices. When you see the name of your headphones, tap it to connect.
Connect a Bluetooth device that has an appSome Bluetooth devices, like heart rate monitors, come with an app for your watch. If you have one of these:
- Open its app on your smartwatch.
- Follow the instructions to pair the accessory to your smartwatch.
Note: ANT+ accessories can’t be paired with Wear OS by Google smartwatches.
Common Operating Gestures S2/E2
| Display screen | Press this button to the application list to open. Hold this button to the Activate Google Assistant. |
| Click | Confirm. |
| Swipe left | Activate Google Fit. |
| Swipe right | Activate Google Assistant. |
| Swipe up | View and manage notifications. |
| Swipe down | Access the fast shadow setting. |
| Long press | Select a watch face that suits you style fits. |
Parameter Information S2/E2
- ScreenAMOLED screen and display 1.4 inch / 400 x 400 px / 287 ppi
- ProcessorSnapdragon Wear 2100
- Memory512 M RAM + 4 GB ROM
- Bluetooth2.4 GHz Bluetooth V4.1 / BLE
- GPSGPS / GLONASS / Beidou
- WiFi2.4 GHz 802.11 b/g/n
- SensorDynamic optical heart rate monitor, speed sensor, gyroscope
- Capacity415 mAh
- OutputBT classic & EDR 9.95 dBMBLE 1.33 dBm – Wifi 13.34 dBm
- Works by2402MHz – 2480MHz (BT/BT4.1) 2412MHz – 2462 MHz ((802.11 b/g/n) (2.4GHz) HT20 for FCC, IC. 2412MHz – 2472MHz (802.11 b/g/n) (2.4GHz) HT20 for CE.
Parameter Informative S2/E2 and Contact
*The content of these specifications can be changed without prior notice. Look for more info on the official website (www.mobvoi.com).
Please get in touch if you have any issues or problem.Manufacturer: Shanghai Mobvoi Information Technology Company Limited.Address: Building 2-106, 1690 Cailun Road, Shanghai (China)Email: [email protected]
Imporer: Tic-Benelux is part of TJM Imports B.V.Adres: Zompstraat 8, 8102 HX Raalte, Nederland.Website: www.tic-benelux.nlEmail: [email protected]
References
[xyz-ips snippet=”download-snippet”]