Tribit BTH72 Active Noise Cancelling Wireless Headphone User Manual![]()
Package Contents
1 x Tri bit Quiet Plus 1 x Protective Case lx USB Type-C Cable72 Wireless Headset
lx 3.5mm Audio Cable 1 x User Manual
Product Diagram
- Active Noise Cancelling Slide Switch
- 3.5mm Audio Input
- LED Indicator
- Volume+/ Next Track
- MFB Button
- Volume-/ Previous Track
- Type-C Charging Port
- Microphone
Turn on /off
- To power on the headphones, press and hold the MFB button for 2 seconds. The LED indicator willflash blue for 1 second.
- To power off, press and hold the MFB button for 5 seconds. The LED indicator will flash red for 1 second and then go off.
Bluetooth Connection
Simultaneous Connection with Two Devices
- Follow the instructions in the”Pairing” section to pair the headphones with Device A.
- Once paired, disable the Bluetooth function on Device A.
- Follow the instructions in the”Pairing” section to pair the headphones with Device B.
- Once paired with Device B, reactivate Bluetooth function on Device A and select”Tribit QuietPlus 72″in the list of paired devices.
- You can now make and receive calls from either of the two paired devices.
Noise Cancellation
The Noise Cancellation Function can reduce the unwanted noise to provide you with a clearer, more lifelike audio effect. You can choose your noise cancelling mode based on your listening preference and environment.Once the function turned on, the ANC state will be on and the green indicator will be always on.
Voice Prompt
Charge the Headphones
Connect the Type-C cable to the Type-C port on the headphone, and a SV power outlet (power adapter is not included). The indicator light will glow red to indicate charging. When the headphones are fully charged (within 3 hours), the indicator light will change from red to blue.
Customer Service
The headphones have a full 18-month warranty against manufacturing defects starting from the purchase date. For FAQs and more information,please email to
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read More About This Manual & Download PDF:
[xyz-ips snippet=”download-snippet”]