Tribit BTS10 StormBox Micro Portable Wireless Speaker User Manual

Tribit BTS10 StormBox Micro Portable Wireless Speaker User Manual

Packing List

• StormBox Micro
• USB-C charging cable
• User Manual
• Warranty Card

Product Illustration

Charging

• Connect this speaker to a 5V power outlet via the providing USB-C charging cable.
• Battery Indicator
  

  	Red indicator is flashing	Low battery
  	White indicator is flashing	Charging
  	All indicators turn off	Full charged

• Indicator Instruction
  

  0-30%	30-50%	50-70%	70-80%	80-100%	Full Charged

Button

Power On/Off

	Short press	Power on		Blue indicator is flashing
Short press	Power off	All indicators turn off
Press and hold it for 8s	Reset	Blue indicator is flashing

Bluetooth Connection

	Press and hold it for 2s	Enters pairing mode		Blue indicator is flashing	Pairing status
Press and hold itfor 10s	Factory reset	Bluetooth indicator is steadily on	Successfully connected

The Stormbox Micro Speaker will automatically connect to the last paired device again if available. If it fails, the speaker will enter to pairing mode.

The speaker can remember up to 8 paired Bluetooth devices.Better still, it can connect to 2 devices simultaneously at a time.

Conversion betwen 2 Connected Devices

1. Pause the playback of the current device
2. Play the audio file of the other device

Volume adjustment

−	Short press	Decrease volume
Keep it pressed for seconds	Continuously decrease volume
+	Short press	Increase volume
Keep it pressed for seconds	Continuously increase volume

Multifunctional Button (MFB)

Music Mode	Short Press	Play/Pause
Double Press	Next Track
Press it for 3 rimes	Previous Track
Press and hold it for 1s	Activate Siri
Conversation Mode	Short press	Answer/End phone call
Press and hold it for 1s	Reject phone call
Short press	Pause the current call and answer the incoming call
Short press	Switch between two phone calls

Party Mode

1. Make sure both two speakers are turned on.
2. Press and hold the Bluetooth button of two speakers for 5s simultaneously, and release the buttons after you hear a prompt sound. In this way, the speakers enter party mode.

Note: The function of party mode can be realized only when you have 2 Tribit Stormbox Micro Speakers.

Party Mode

1. Make sure both two speakers have entered party mode.
2. Short press the Bluetooth button on any of the two speakers. 3. Release the buttons when you hear the voice of Stereo Mode. One speaker will sound “Left” and the other will sound “Right”, and then the stereo mode is activated.

Note: The function of stereo mode can be realized only when you have 2 Tribit Stormbox Micro speakers.

Conversion between Party Mode and Stereo Mode

Short press the Bluetooth button on any of the two speakers.

Disable the Party Mode or Stereo Mode

Press and hold the Bluetooth button for 5s on any of the two speakers, then both will re-enter Bluetooth pairing mode.

Specifications

Bluetooth Version	5.0
Output Power	9W
Frequency	70Hz – 20KHz
Battery Type	3.7V/ 2600mAh Lithium battery
Charging Time	3.5 hours @5V / 1A
Dimensions	98.3 x 98.3 x 34.8 mm
Waterproof Grade	IP67

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.