QUICK START GUIDESTEALTH™600GEN2
IMPORTANT READ BEFORE USING
Any questions? ¿Preguntas?turtlebeach.com/supportModel: Stealth™ 600 Gen 2 para auriculares de juego para PlayStation®
IMPORTANTPLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE.
Connect to the Turtle Beach Audio Hub for Windows or Mac® to update the firmware.
CONTENTS
HEADSET CONTROLS
Use Superhuman Hearing® Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads.During gameplay, you can activate and deactivate Superhuman Hearing ®by pressing the POWER button once, quickly.
Microphone MuteFlip up the mic to mute. There is an audible tone when the mic is muted or unmuted.
EQ PRESETS
Signature SoundBass BoostBass + Treble BoostVocal Boost
SETUP FOR PLAYSTATION®
- Connect Mini Transmitter to USB Port
- Power on Headset
- Go to Settings > Devices > Audio Devicesa. Select Stealth™ 600 Gen 2 for Input & Output Deviceb. Set Output to Headphones to All Audioc. Set Volume Control (headphones) level to maximumd. Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone
CHARGING
The Stealth ™600 Gen 2 gives you 15 hours of rechargeable battery life. Make sure to charge it regularly before storing it.
Headset StorageAlways charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
LED BEHAVIORS
| TRANSMITTER LED | MEANING |
| Solid Blue | Headset and Mini Transmitter Paired |
| Double-Blink Blue | Not Paired |
| Breathing Red | Mic Muted |
| HEADSET LED | MEANING |
| Solid Blue | Headset and Mini Transmitter Paired |
| Breathing Blue | (While Charging) Battery Full |
| Double-Blink Blue | Not Paired |
| Solid Red | (While Charging) Battery Charging |
| Breathing Red | Battery Low |
PAIRING
The headset and transmitter are paired out of the box, indicated by a solid LED on the transmitter. If your transmitter’s LED is double-blinking, follow the steps to pair your headset and transmitter.
- Connect your Stealth™ 600 Gen 2 for PlayStation® Transmitter into an available USB port on your PlayStation® 4 console. Your Transmitter will begin to double blink blue as it searches for your Headset.
- Power on your Stealth™ 600 Gen 2 for PlayStation ® Headset and the LED will begin to double blink blue as it searches for your Transmitter.
- Within 10 seconds, the Transmitter’s and Headset’s LEDs remain solid, indicating a successful pairing.
After 30 seconds, your transmitter will search for both the previously paired headset or any available Stealth™ 600 Gen 2 headset to pair to. Bring the two units closer together to ensure faster pairing.
Regulatory Compliance Statements for Stealth™ 600P Gen 2 RX & TXLocal Restrictions on Radio UsageCaution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type the number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document atthe following URL http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
Federal Communications Commission (FCC) Compliance Notices This section includes the following FCC statements for the Stealth™600P Gen 2 RX & TX:
- FCC ID: XGB-TB3140 (RX) & XGB-TB3141 (TX)
- Non-Modification Statement
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
Class B Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doesn’t cause harmful interference to radio or television reception, which can be diminished by turning the equipment off and on, the user is encouraged lo try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.RF Radiation Exposure & Hazard StatementsTo ensure compliance with FCC RF exposure requirement, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.] from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. installers or the radio and users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Non-Modification StatementUse only the supplied Internal antenna. Unauthorized antennas, modifications, or attachments could damage the Stealth™ 600P Gen 2 RX & TX Models and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4 GHz antennas.This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)
Canadian ICES Statements IC:3879A-3140 (RX) and IC: 38791A-3141 (TX)This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any Interference, including interference that may cause undesired operations of the device.
Ce dispositif est conforme aux normes NMB003 et CNR-247 d’Industrie CanadaSon fonctionnement est soumis aux deux conditions suivantes :
- Ce dispositif ne doit pas causer d’interférences nuisibles et;
- Il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal.
To prevent radio Interference to the licensed service (I.e. co-channel Mobile Satellite systems) this device is Intended to be operatedindoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna] that is installed outdoors issubject to licensing and not supported by Stealth ™600P Gen 2 RX & TX Models.RF Radiation Exposure & Hazard StatementTo ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.) away from all persons. Using higher gain antennas and types of antennas not covered under the IC certification of this product is not allowed. Installers of the radio and end-users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, Switzerland.
Declaration of Conformity 
Marking by this symbol:Indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union (2014/53/EU).This equipment meets the following conformance standards:Safety:60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 (T-Mark License),60950-1: 2005 (2nd Ed.) + Am 1: 2009 + Am 2: 2013 (CB Scheme Certificate),62368-1: 2014 + A11 (T-Mark License),62368-1: 2014 (CB Scheme Certificate),50332-1: 2013, EN 50332-2: 2013, EN 71-3: 2013Additional licenses issued for specific countries available on request.
EMC:55032: 2015; CISPR 32: 2015,301 489-1 v2.1.1 (2017-02), EN 301 489-17 v3.1.1 (2016-11),61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010,61000-4-8: 2010The products are licensed, as required, for additional country-specific standards for the InternationalMarketplace. Additional issued licenses are available upon request.Radio: EN 300 328 V2.1.2 (2019-07)SAR: EN 62311: 2008Environmental:RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU,REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC,Toys Safety Directive 2009/48/EC
WARNING!This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user is required ttake appropriate measures.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfill our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols, and the waste hierarchy principles of reducing,reuse and recycle. https://www.complydirect.com/the-recycling-room/Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
To access the rating label:
- Remove the left ear pad by pulling the earpad straight up using your thumb.
- Once you’ve released the cloth from the lip on top, pull the earpad straight back and it should slip right off.
To replace the ear pad, follow the same process in reverse.
report this adNot seeing what you’re looking for here?Visit turtlebeach.com/support for the latest Tech Support information.
References
[xyz-ips snippet=”download-snippet”]