Category: ULINE
-
ULINE Industrial Steel Shelving Installation Guide
INDUSTRIAL STEEL SHELVING1-800-295-5510uline.com # DESCRIPTION QTY. ULINE PART NO. 1 36 x 12′ Shelf (For H-3841 & H-3843) 1 H-3841-ADD 1 36 x 18″ Shelf (For H-3353 & H-2883) 1 H-3353-ADD 1 36 x 24″ Shelf (For H-3354 & H-2884) 1 H-3354-ADD 1 48 x 12′ Shelf (For H-3842 & H-3844) 1 H-3842-ADD 1 48…
-
ULINE H-1562 Manager’s Chair Instruction Manual
H-1562 MANAGER’S CHAIR1-800-295-5510uline.com PARTS ASSEMBLY INSTRUCTIONS Use three large bolts and three wide washers to secure each arm on the underside of the chair base. (See Figure 1) Use four small bolts and four wide washers to secure seat mount assembly. (See Figure 2) Align holes on the chair back with holes in the seat…
-
ULINE S-7702 Insert Cards Instructions
S-7702 INSERT CARDS1-800-295-5510uline.com INSTRUCTIONS MICROSOFT WORD 2010 SETUP (PC USERS)CREATING LABELS On the toolbar ribbon, click the MAILINGS tab. (See Figure 1) Click the LABELS button. (See Figure 2) On the LABELS tab, click the OPTIONS button. (See Figure 3) Under LABEL INFORMATION, use the drop-down menu to select MICROSOFT. (See Figure 4) Under PRODUCT NUMBER,…
-
ULINE H-6402 8″ Raised Base for H-6401 Installation Guide
H-6402 8″ RAISED BASE FOR H-64011-800-295-5510uline.com TOOLS NEEDED PARTS ASSEMBLY Attach leg to the corner of the base using bolts and nuts, with nuts to the inside. (See Figure 1) Repeat step 1 for all of the legs. Figure 1 0421 IH-6402 [xyz-ips snippet=”download-snippet”]
-
ULINE H-3787 4 Way Slanted Arm Clothes Rack Installation Guide
H-37874 WAY SLANTED ARM CLOTHES RACK TOOL INCLUDED PARTS LIST ASSEMBLY Attach two frames using a spacer and two bolts. (See Figure 1) Attach legs to frames using two bolts each. (See Figure 2) Insert levelers into holes on the bottom of the legs and frames. Stand unit up. Slide arms into holes at the…
-
ULINE H-5070 Folding Cart Installation Guide
H-5070 FOLDING CART1-800-295-5510 – uline.com TOOL NEEDED Rubber Mallet PARTS Main Assembly x 1 Wire Basket x 1 Swivel Caster x 4 ASSEMBLY 1. Align swivel casters with caster inserts in the main assembly. Tap casters into place with a rubber mallet. (See Figure 1) 2. Align wire basket with a crossbar on the wide…
-
ULINE H-3935 Electric Lift Table Installation Guide
H-3934, H-3935 1-800-295-5510 ELECTRIC LIFT TABLE uline.com PRIMARY ASSEMBLY # DESCRIPTION QTY. ULINE PART NO. MFG. PART NO. 1 Maintenance Bar 2 ———————— L2K-B7004321 2 Upper Cylinder Pin Weldment 1 ———————— L2K-B7004335 3 Scissor Roller 4 H-3934-SCRRL EZL-B5000096 4 Platform Shaft 1 ———————— EZ35-B5004968 5 Base Shaft 1 ———————— EZ35-B5004969 6 Bearing Insert 4 ————————…
-
ULINE H-4420 IBC Tanks Instructions
H-3886, H-4420 IBC TANKS 1-800-295-5510 – uline.com CLOSURE SPECIFICATIONS 2″ plug in 6″ fill port cap must be torqued to 15 ft.-lbs.NOTE: Do not remove this plug. The filling should be done through a 6″ opening. 6″ fill port cap must be torqued to 75 ft.-lbs. The valve must be torqued to 55 ft.-lbs. CAP…
-
ULINE S-14306 Safety Toe Covers Instructions
S-14306SAFETY TOE COVERS 1-800-295-5510 – uline.com CSA CERTIFIEDZ334-14 CLASS 7231-02 Grade 1 toe protection Impact protection 125J SAFETY INSTRUCTIONS NOTE: Carefully read these instructions before using this CSA-approved product. WARNING! This product was designed to offer occasional protection against injury to the wearer’s toes due to crushing or falling objects. It is not a substitute…
-
ULINE H-7902 Deluxe Plastic A-Frame Sign Instructions
H-7902 DELUXE PLASTIC A-FRAME SIGN1-800-295-5510uline.com SIGN INSERTION Slide sign down through tabs. (See Figure 1) Pull sign in front of the bottom slot until the sign hits the ground. (See Figure 2) Push sign up into the top slot. (See Figure 3) Pull sign down into the bottom slot. (See Figure 4) [xyz-ips snippet=”download-snippet”]
