AERO BUDS IITRUE WIRELESS
QUICK START GUIDE
855-999-8041 | www.xtremecables.com
Package Contents
Bluetooth® EarbudsCharging CaseCharging CableManual
GETTING STARTED
|
4. Right Earbud LED Indicator5. Right Control Button6. Left Earbud LED Indicator7. Left Control ButtonR Right EarbudPause/Play/Answer Call, Next Track |
CHARGING YOUR CASE
- Charge on the go charging case, with the included micro USB cable for 2-3 hours. (LED (2A) will blink red).Do not charge longer than the suggested time. Do not charge overnight.
- When LED (2A) is illuminated solid red battery case is fully charged.
2A Flashing RED: Battery Case is chargingSolid RED: Battery Case is fully charged2B Solid BLUE: Battery Case is charging earbudsOFF: Battery Case is off
CHARGING YOUR EARBUDS
- Place Right and Left Earbuds in battery case charging cradle and press the power button on the battery case (3).
- Charging case LED indicator (2B) will illuminate Blue and the earbud LED indicators (4, 6) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (4, 6) turn solid blue, earbud batteries are fully charged.
- After earbuds are fully charged, press the charging case power button (3) to turn the charging case OFF.
MONO MODE (SINGLE EARBUD USE)
- Remove earbud from the charging cradle and power on by pressing the control button (7). Or (5) for 3 seconds depending on which earbud you using.
- Once the earbud is powered on, proceed to pair.
STEREO MODE (DUAL EARBUD USE)
- Remove both earbuds from the charging cradle and place them in your ears.
- Make sure Bluetooth® Search Mode is turned off on your mobile device.
- Hold the right earbud button (7) for 3 seconds and then press left earbud button (9) for 3 seconds until they are powered on.(Earbud LEDs will flash Red and Blue to indicate that they are in Link mode)
- Earbuds will automatically link together after a few seconds, and earbuds will alert “connected”. (LEDs will flash blue)
- Once Earbuds are linked together you may proceed to pairing with your mobile device.
PAIRING
- Enable Bluetooth® search mode on your mobile device and search for pairing name “AERO 2” and select it on your mobile phone. Once the earbuds are successfully paired a notification will sound “connected.”
- Now you can enjoy your true wireless Bluetooth® Earbuds.
report this ad*Note: Once earbuds have been initially paired successfully with your mobile device they will automatically pair the next time they are powered on.
OPERATING BLUETOOTH® EARBUDS
| FUNCTION | OPERATION |
| Power On | Press (5) or (7) for 3 seconds |
| Power Off | Press (5) or (7) for 5 seconds |
| Play/Pause | Single press (5) or (7) |
| Answer/Reject | Answer (7) or Reject (5) |
| EARBUDS | LED INDICATIONS (4) & (6) |
| Power On | Red and blue LED will flash 1 second |
| Link Mode | Flashing Blue & Red |
| Paired Successfully | Flashing Blue |
| Low Battery | Flashing Red |
| Power Off | LED Off |
| EARBUDS IN CRADLE | |
| Charging S | Solid |
| Fully Charged | Solid Blue |
| CHARGING CASE | See CHARGING YOUR CASE |
[xyz-ips snippet=”download-snippet”]