LYNXTRUE WIRELESS EARBUDSQUICKSTART GUIDE
GETTING STARTED
| 1. Micro USB charging port.2. Battery level LED indicator.3. Lid release button.4. Battery level check button5. Charging Cradle | 6. Right earbud LED indicator7. Right touch press control button8. Left earbud LED indicator.9. Left touch press control button10. Ear wing (S, M, L) |
L Left EarbudPause/Play/Hangup/Answer call, PreviousTrack, Volume Down
R Right EarbudPause/Play/Hangup/Answer call,Next Track (Hold for 2 seconds), Volume Up
CHARGING YOUR CASE
— Charge on the go charging case, with the included micro USB cable for 2-3 hours.— When all LEDs are illuminated battery case is fully charged.— To check the battery level, press the power indicator(4) button located inside the case.
RED– Charging Flashing BLUE– Link Mode Solid BLUE– Paired Flashing RED – Battery Low
— Place Right and Left Earbuds in battery case charging cradle (5) to properly charge.— Earbuds LED indicator will illuminate Red to indicate that they are charging properly. When LED turns off (6) earbuds battery is fully charged.
POWERING ON
— Remove both earbuds from the charging cradle (5) and power on by touch pressing the “X” logo for 3 seconds(7).— Earbuds will flash Blue to indicate that they are in Link mode. Right & Left earbuds will automatically link together and LED on both earbuds will remain solid(7)(8).
EARBUD PLACEMENT
 |
 |
 |
| InsertInsert the earbud into your ear. | RotateRotate the earbuds to fit snug inside your ear canal. | TuckTuck the tip of the earring (10) into the ridge of your ear. |
*Note: Please avoid touching the “X” logo while positioning in-ear, to prevent the earbuds from unintentionally powering down.
PAIRING
— Enable Bluetooth search mode on your mobile device and search for pairing name “LYNX-R” or “LYNX-L”, and select it on your mobile phone. Once the earbuds are successfully connected a notification will sound.— Now you can enjoy your truly wireless Bluetooth Earbuds.
*Note: Once earbuds have been initially paired successfully with your mobile device they will automatically pair the next time they are powered on.
OPERATING BLUETOOTH EARBUDS
| Function | Operation |
| Power On | Hold L or R for 3 seconds |
| Power Off | Hold L or R for 5 seconds |
| Play/Pause | Single tap L or R |
| Answer/Reject | Single tap L or R |
| Raise Volume | Double Tap R |
| Lower Volume | Double Tap L |
| Change Previous | Hold L for 2 seconds |
| Change Next Track | Hold R for 2 seconds |
| Earbuds | LED indications (Blue & Red) |
| Power On | Red and Blue LED will flash 1 second |
| Pairing | Flashing Blue |
| Paired Successfully | Solid Blue |
| Low Battery | Flashing Red |
| Power Off | Remain Off |
| Earbuds in Cradle | |
| Charging | Solid Red |
| Fully Charged | Remain Off |
[xyz-ips snippet=”download-snippet”]