XTREME XBH9-1014 Fusion Wireless magnetic Earbuds Instruction Manual

WIRELESS MAGNETIC EARBUDS855-999-8041www.XtremeCables.com

Charging The Earbuds

• To charge your Xtreme Fusion Bluetooth earbuds, connect the supplied cable to the Micro-USB (5) charging port and connect the other end to a USB power outlet (5V adaptor not included) for a minimum of 3 hours
• For best performance, please make sure the battery is fully charged before use.

Operating Bluetooth Earbuds

1. Turn the Fusion Earbuds on by holding the Multifunction Button (3) until the LED lights (1) begin Flashing blue and red.
2. The earbuds will enter pairing mode. Enable Bluetooth search mode on your audio device and search for pairing name FUSION and select it on your audio device. Once the Xtreme Fusion Bluetooth earbuds have successfully connected, the device will state that the device has been connected. The LED will flash blue.
3. Press the Multifunction Button (3) to answer calls, pause and play, and hang up calls.
4. To change to the next track, Short press the” + “(4) To raise the volume, long-press the Volume + Button (4)
5. To change to the previous track, short press the” – ” (2) To lower volume, long-press the Volume — Button (2)
6. To power down the earbuds, Hold the Multifunction button (3) for 3 seconds until the device says”Power Off”. The LED light indicator will remain off.