Category: Z-Wave
-
Z-Wave PAC01 JEM-A Adapter User Manual
PAC01 Z-Wave JEM-A Adapter Introduction PAC01 is a security-enabled wireless JEM-A Adapter, based on Z-Wave Plus technology. Z-Wave Plus™ enabled devices displaying the Z-Wave Plus™logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturers’ Z-Wave ™ enabled networks. Z-Wave controller can On/Off the thermostat by sending Thermostat Setback command.PAC01…
-
Z-Wave SA301 Universal Module with 3 in 3 Out User Manual
UNIVERSAL MODULE WITH 3 In 3 Out The Universal Module is used to translate wired products into wireless Z-Wave protocol, integrating them into the Z-Wave network of a smarthome environment. It has 3 sets of input terminals and 3 sets of relay output. Through the Universal Module, the Z-Wave Controller can read the input signal…
-
Z-Wave RAZBERRY Plug-On Module User Manual
Z-Wave RAZBERRY Plug-On Module Installation steps: Install the RaZberry 7 shield on the Raspberry Pi GPIO Install Z-Way software The RaZberry 7 shield is designed to work with the Raspberry Pi 4 Model B, but is fully compatible with all previous models, such as: A, A+, B, B+, 2B, Zero, Zero W, 3A+, 3B, 3B+.…
-
Z-Wave STRIPS Door and Window Sensor User Guide
Sensative STRIPS Door and Window Sensor SKU: SENE1110 Quickstart This is a Alarm Sensor for Europe. To run this device please insert fresh 1 * built in LiMnO2 batteries. Please make sure the internal battery is fully charged. Strips is delivered in “auto-add” mode. Follow the process below to add Strips in a Z-Wave network.…
-
Z-Wave HS-WX300 In-Wall Dimmer and Switch User Guide
HS-WX300 User GuideOnline manual for the HS-WX300 In-wall Dimmer & Switch Overview HS-WX300 is a Z-Wave in-wall light switch that may be configured to operate as either a dimmer switch or an on/off switch. It may be installed with or without a neutral wire and it works with both wired and wireless companion switches in…
-
Z-Wave PAN 34 In Wall Roller Shutter Controller User Manual
In Wall Roller shutter controllerPAN34 Introduction The in-wall Roller Shutter Controller is designed to switch rise/lower roller shutters connected to its terminals using radio waves, controllers, and a push-button directly connected to this Roller Controller.This in-wall Roller Shutter Con: roller is a Z-Wave Plus\’”‘ enabled wireless device fully compatible with any Z-WaveTM enabled networks. This…
-
Z-Wave Slim Multisensor PST02-A/B/C User Manual
Z-Wave Slim Multisensor PST02-A/B/C The slim multisensor PST02 has PIR, door/window, temperature and illumination, 4 sensors function in one, based on Z-WaveTM technology. It is the Z-WaveTM plus product, it support the security, OTA… Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control…
-
Z-Wave Door/Window Sensor PSM08 User Manual
Z-Wave Door/Window Sensor PSM08 User Manual Door/Window Sensor PSM08 The door/window sensor PSM08 has door/window sensor function,based on Z-WaveTM technology.This device is a Security Enabled Z-Wave Plus Product. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF…
-
Z-Wave IR Extender PAR01 User Manual
Z-Wave IR Extender PAR01 User Manual PAR01, is a Z-Wave plus compliant Z-Wave-to-IR Bridge to control split air conditioner by receiving Z-Wave command and translating to Infrared command. With its comprehensive built-In and cloud-stored IR database (library). PAR01 can control different brands and models of air conditioners worldwide.PAR01 is a security enabled Z-Wave plus device.…
-
Minoston™ Z-Wave™ Meter Plug User Manual Federal Communications Commission (FCC) Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This…
