Category: Honeywell
-
Honeywell SNDH-H Series User Guide
Honeywell SNDH-H Series DESCRIPTIONThe SNDH-H Series Hall-Effect Speed Sensors uses a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages. The flux density of the permanent magnet alters when approached by ferrous metal. This is…
-
Honeywell DPR SERIES TRUSTABILITY BOARD MOUNT PRESSURE SENSORS Installation Guide
Honeywell DPR SERIES, TRUSTABILITY BOARD MOUNT PRESSURE SENSORS Installation Guide 32347060Issue B 1.0 GENERAL INFORMATION The TruStability™ DPR Series is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. These sensors are fully calibrated and temperature compensated for sensor offset, sensitivity,…
-
Honeywell TARS-IMU Sensors for Depth Control User Guide
Honeywell TARS-IMU Sensors for Depth Control Background As technology advances, processes are transitioning from operator control to computer-programmed or computer-assisted programmed equipment/ machine control. As an example a machine, such as a backhoe, is operating in an application for above-grade or below-grade job site, it can be critical to remove a pre-determined amount of material…
-
Honeywell Linear Hall-Effect Sensor ICs Installation Guide
Installation Instructions for the SS490 SeriesLinear Hall-Effect Sensor ICs PK 88840Issue 8 SOLDERING INSTRUCTIONSNOTICEDo not wave solder surface mount sensor ICs (catalog listings with suffixes -S or -SP). Wave soldering may negatively affect sensor performance and reliability and will void Honeywell’s warranty. Surface mount (catalog listings with suffixes -S or -SP): Use infrared reflow process…
-
Honeywell TARS-IMU Sensors for Wheel Slippage Detection User Manual
Honeywell TARS-IMU Sensors for Wheel Slippage Detection User Manual Background In off-road vehicles, there are two types of contact that tires/wheels/ tread can make with the surface. First, static content occurs when the tire/wheel/tread and the surface are not slipping relative to each other. Second, there’s dynamic contact where the tire/wheel /tread is slipping…
-
Honeywell TARS-IMU Sensors for Vehicle Implement Control User Manual
Honeywell TARS-IMU Sensors for Vehicle Implement Control User Manual TARS-IMU Sensors for Vehicle Implement Control Background In the past, blades or buckets integral to the front of a dozer, crawler, grader, or wheeled loader relied on the expertise of the equipment operator for grade leveling. As the blade of the equipment engages the grade, the…
-
Honeywell Digital Position Sensor ICs SS41K6 Installation Guide
Honeywell Digital Position Sensor ICs SS41K6 Installation Guide GENERAL INFORMATION CAUTIONELECTROSTATIC DISCHARGE DAMAGEEnsure proper ESD precautions are followed when handling this product.Failure to comply with these instructions may result in product damage. SOLDERING AND ASSEMBLY CAUTIONIMPROPER SOLDERING Ensure leads are adequately supported during any forming/shearing operation so that they are not stressed inside the plastic…
-
Honeywell High Sensitivity Latching Digital Hall-effect Sensor Installation Guide
Honeywell High Sensitivity Latching Digital Hall-effect Sensor GENERAL INFORMATION CAUTION ELECTROSTATIC DISCHARGE DAMAGEEnsure proper ESD precautions are followed when handling this product.Failure to comply with these instructions may result in product damage. SOLDERING AND ASSEMBLY CAUTIONIMPROPER SOLDERING Ensure leads are adequately supported during any forming/shearing operation so that they are not stressed inside the plastic…
-
Honeywell AQ3CO SENSOR Carbon Monoxide (CO) Gas Sensor User Guide
AQ3COSENSORCarbon Monoxide (CO) Gas Sensor The purpose of this document is to present the performance specification of the AQ3 Series AQ3CO Carbon Monoxide Gas Sensor. DOCUMENT PURPOSE This document should be used in conjunction with the AQ3CO Characterization Note and the Product Safety Datasheet (PSDS 15).The data provided in this document is based on the…
-
Honeywell AQ3STF SENSOR Sulfur Dioxide (SO2) Gas Sensor User Guide
Honeywell AQ3STF SENSOR Sulfur Dioxide (SO2) Gas Sensor User Guide Sensor Part Number (without board):ADQ045-H04Module Part Number (with board):QAD045-H04PCBA Part Number: AQ3-BP01 DOCUMENT PURPOSE This document should be used in conjunction with the AQ3STF Characterization Note and the Product Safety Datasheet (PSDS 19).The data provided in this document is based on the assumption that the…
