Category: Sunco Lighting
-
SUNCO LIGHTING DL_SMDR4-11W-27K-1PK Smooth Downlight 4″ Installation Guide
SUNCO LIGHTING DL_SMDR4-11W-27K-1PK Smooth Downlight 4″ Installation Guide COMPONENTS TP24 Connector E26 Base EASY INSTALLATION Turn off circuit breaker that provides power to the light switch for the recessed lights. Locate the housing.Remove previous fixture, fixture may be hot so allow time to cool after turning off power. Ensure the size of the opening is…
-
SUNCO LIGHTING Wraparound Installation Guide
SUNCO LIGHTING Wraparound Installation Guide WRAPAROUND 11” EASY INSTALLATION JUNCTION BOX INSTALLATION Turn off circuit breaker that provides power to the light switch for the recessed lights. If replacing a fixture, remove existing fixture and make a sketch of wiring configuration (by color) or mark wires with masking tape for identification. Mounting surface must be…
-
Sunco Lighting 50W LED Ceiling Panel Installation Guide
Sunco Lighting 50W LED Ceiling Panel EASY INSTALLATION RECESSED INSTALLATION Required Tools: Drill, Ladder, Hammer, Pliers, Tape Measure, Pencil, Philips Screwdriver Prior to install, remove the existing light fixture (if any) from the ceiling. Turn off the switch and circuit breaker before installing this LED light fixture. Turn the Ceiling Panel face down on a…
-
SUNCO LIGHTING Remodel Can Installation Guide
Intended use – CAN REMODEL CAN 6″Install Guide and Manual EASY INSTALLATION Turn Power OFF1. Turn off the circuit breaker that provides power to the light switch for the recessed lights. ·Disconnect existing light fixture (if applicable). 2. Locate ceiling joists in the area where you want to install the recessed light with a stud…
-
Sunco Lighting Disk LED Downlight (15W) Installation Guide
Sunco Lighting Disk LED Downlight (15W) COMPONENTS EASY INSTALLATION SURFACE MOUNT-JUNCTION BOX Turn off circuit breaker that provides power to the light switch for the recessed lights.• This fixture is compatible with a 4 inch and 6 inch junction box Remove the lens by twisting clockwise. Connect the supply wires to the junction box wires…
