Tag: ULINE
-
ULINE H-5048 10 Qt. Industrial Backpack Vacuum User Guide
ULINE H-5048 10 Qt. Industrial Backpack Vacuum User Guide PRODUCT INSTRUCTIONS # DESCRIPTION QTY. ULINE PART NO. MFG. PART NO. 1 Replacement Double Swivel Elbow Cuff (Black) 1 H-5048-1 101928 2 Static-Dissipating Hose with Cuffs (Black) 1 H-5048HOSE 103048 3 1½” Replacement Swivel Cuff (Black) 1 H-5048-SWCUF 100694 4 Purple Cap 1 H-5048-CAP 833948 5…
-
ULINE 8-12 Step Rolling Safety Ladders Installation Guide
8-12 STEP ROLLING SAFETY LADDERS10″ DEEP TOP STEP1-800-295-5510uline.com TOOLS NEEDED PARTS ASSEMBLY WARNING! Assembly of these types of ladders can be inherently dangerous. Please take all necessary precautions during the assembly process. Always use a separate ladder to finish assembly in high places. Never climb a ladder that is not completely assembled. Do not assemble…
-
ULINE H-5060 Slatwall Panel Instruction Manual
H-4774, H-4776 H-5060SLATWALL PANELS1-800-295-5510uline.com SAFETY INSTRUCTIONS ALWAYS wear safety glasses when using any power tool. ALWAYS use hearing protection when using loud equipment. DO NOT sit, climb, hang or step on shelves or brackets. DO NOT overload shelves or brackets. DO NOT try to install Slatwall panels yourself. Use 2 people. CAPACITY: 40 lbs. without…
-
ULINE Slatwall Quarter Panels Installation Guide
ULINE Slatwall Quarter Panels Installation Guide SAFETY INSTRUCTIONS ALWAYS wear safety glasses when using any power tool. ALWAYS use hearing protection when using loud equipment. DO NOT sit, climb, hang or step on shelves or brackets. DO NOT overload shelves or brackets DO NOT try to install slatwall panels yourself. Use 2 people. CAPACITY:40 lbs.…
-
ULINE Drop Over Cable Protector Instructions
ULINE Drop Over Cable Protector INSTRUCTIONS COMPONENTS NOTE: Drop over protectors do not prevent abrasion to cable from below. ASSEMBLY Interlock with T-connectors to extend protection length. (See Figure 1) Inspect areas for safety hazards. Assemble sections by aligning female connectors over male connectors and press with foot to secure. Install cable as required. Place…
-
ULINE Crowd Control Barrier Posts with Retractable Belt Instructions
ULINE Crowd Control Barrier Posts with Retractable Belt Instructions TOOLS NEEDED BELT CASSTITE REPLACEMENT INSTRUCTION Loosen the four bottom screws securing the cassette into the post. (See Figure 1) Slide the cassette out of the post. (See Figure 2) Loosen the lower screws slightly on the replacement cassette, but do not remove them completely. (See…
-
ULINE 5-7 Step Rolling Safety Ladders Installation Guide
5-7 STEP ROLLING SAFETY LADDERS 10″ DEEP TOP STEP1-800-295-5510uline.com TOOLS NEEDED Step Ladder Rubber Mallet 9/16″ Wrench or Socket (2) 7/16″ Wrench or Socket Safety Glasses PARTS ASSEMBLY Hardware Kit (1) (misc. hardware included) WARNING! Assembly of these types of ladders can be inherently dangerous. Please take all necessary precautions during the assembly process. Always…
-
ULINE H3133U-12, H-3134U-12, H-3135U-12, H-3136-12, H-5210-12 8-12 Step Safety Angle Rolling Ladders 12″ Deep Top Step Installation Guide
H-3133U-12, H-3134U-12 H-3135U-12, H-3136-12 H-5210-128-12 STEP SAFETY ANGLE ROLLING LADDERS12″ DEEP TOP STEP1-800-295-5510uline.com TOOLS NEEDED PARTS ASSEMBLY WARNING! Assembly of these types of ladders can be inherently dangerous. Please take all necessary precautions during the assembly process. Always use a separate ladder to finish assembly in high places. Never climb a ladder that is not…
-
ULINE H-5592, H-5593, H-5594 Crossover Ladders Installation Guide
ULINE H-5592, H-5593, H-5594 Crossover Ladders Installation Guide TOOLS NEEDED PARTS # QTY. DESCRIPTION 1 2 Stile 2 1 Platform 3 2 Left Handrail 4 2 Right Handrail 5 36 1/2-13 x 114″ Bolt 6 36 1/2″ Nylon Hex Nut ASSEMBLY WARNING! Please read and save these instructions. Read carefully before attempting to assemble, install,…
-
ULINE Slatwall Vertical Panels H-6351 Instructions
ULINE Slatwall Vertical Panels H-6351 Instructions TOOLS NEEDED Hammer Tin Snips Pry Bar UNPACKING INSTRUCTIONS NOTE: Leather gloves and safety glasses should be worn when opening and assembling the slatwall vertical panels. Two person assembly is recommended. Lay vertical slatwall panels flat on the ground. Snip metal bands. Use pry bar and hammer to remove…
