Tag: ULINE
-
ULINE H-8906, H-8907, H-8908, H-8909, H-8910, H-8911, H-8912 ZT411/ZT421 Zebra Industrial Barcode Printer Installation Guide
ULINE H-8906, H-8907, H-8908, H-8909, H-8910, H-8911, H-8912 ZT411/ZT421 Zebra Industrial Barcode Printer OUTER CASING # DESCRIPTION QTY. ULINE PART NO. MFG. PART NO. 1 Standard Control Panel ZT411 (Includes USB Ports) 1 ———– P1105147-001 1 Standard Control Panel ZT421 (Includes USB Ports) 1 ———– P1105147-002 1 Economy Control Panel ZT411 (Does Not Include USB…
-
ULINE H-7618 Single Monitor Mount Standard Installation Guide
H-7618SINGLE MONITOR MOUNT STANDARD 1-800-295-5510uline.com TOOLS NEEDED Phillips Screwdriver 3 x 3 Allen Wrench4 x 4 Allen Wrench (F)5 x 5 Allen Wrench (G)6 x 6 Allen Wrench (all included) Two Person Assembly Required PARTS # DESCRIPTION QTY. 1 Tube Cover 2 2 Cable Clip 2 3 Monitor Arm 1 4 Tube 1 5…
-
ULINE H-7620 Single Monitor Mount Easy Adjust Installation Guide
H-7620 SINGLE MONITOR MOUNT EASY-ADJUST 1-800-295-5510uline.com TOOLS NEEDED Phillips Screwdriver Two Person Assembly Required 4 x 4 Allen Wrench (G) 5 x 5 Allen Wrench (H) (included) PARTS # DESCRIPTION …
-
ULINE H-5823 3 Door Enclosed Cork Board Installation Guide
H-58233 DOOR ENCLOSED CORKBOARD TOOLS NEEDED PARTS TOP HANGING BRACKET MOUNTING Determine board location. Position top hanging brackets 6″ from the outside edge of the board with bracket holes 2 ” from top of the board. (See Figure 1) Mark wall at centers of bracket holes. (See Figure 2) Drill holes for each hanger in…
-
ULINE H-293 Impulse Sealer with Cutter Installation Guide
H-293IMPULSE SEALER WITH CUTTER 1-800-295-5510uline.com # DESCRIPTION QTY. ULINE PART NO. MFG. PART NO. 1 Body 1 ———- KF-300HC-1 2 Timer 1 H-293-011 KF-300HC-2 3 Screw 4 H-293-003 KF-200HC-3 4 Bow Spring 2 H-6678 KF-300HC-4 5 Transformer 1 H-190-18/19 KF-300HC-5 6 Transformer Bracket 1 ———- KF-300HC-6 7 Screw 1 H-163-7 KF-200HC-7 7-1 Spring Washer 1…
-
ULINE H-2035 Shrink Tunnel Leg Kit Installation Guide
H-2035SHRINK TUNNEL LEG KIT 1-800-295-5510uline.com LEG KIT INSTALLATION AND SETUP NOTE: Leg kit works with both US model H-2034 and Canada model H-4018. CAUTION! Assembling the leg kit to the conveyor can be dangerous. Two people or a mechanical lift device must be used to position the conveyor above the leg kit until they are…
-
ULINE Ratchet Tie-Downs Instruction Manual
RATCHET TIE-DOWNS USAGE INSTRUCTIONS Fully engage end hooks so that a secure tie-down point rests against the base (Bearing Point) of the hook.Never load the tip of the hook.NOTE: Handle must always be in line with the direction of pull to achieve Working Load Limit. (See Figure 1) Insert the free end of the strap…
-
ULINE S-9943, S-21382 Plastic Pail Lid With Spout Installation Guide
S-9943,S-21382PLASTIC PAIL LIDWITH SPOUT TOOL NEEDED ASSEMBLY INSTRUCTIONS TO ATTACH LIDUsing proper closing equipment, such as a plate or roller closure, is recommended. If this equipment is not available, follow the instructions below.ALIGN AND SECURE LID Place lid on top of container make sure container rim and lid are lined up. Use a rubber…
-
ULINE H-1871 Jumbo Heavy Duty Storage Cabinet Installation Guide
H-1871JUMBO HEAVY DUTY STORAGE CABINET PRIMARY ASSEMBLY PRIMARY ASSEMBLY PARTS LIST # DESCRIPTION QTY. ULINE PART NO. MFG. PART NO. 1 Back Panel – Black 2 ———– 055BA-BLK Back Panel – Gray 2 ———– 055BA-MGY Back Panel – Tan 2 ———– 055BA-CPY 2 Right Side Panel – Black 1 H-1871BL-RS 056RS-BLK Right Side Panel –…
-
ULINE 6″ Crimper Hand Sealer H-1069 User Manual
H-10696″ CRIMPERHAND SEALER1-800 -295-5510 uline.com SETUP Attach the two metal clamp brackets (A) approximately 4½” apart to any straight-edge table with a depth 1½” and height of up to 36″. (See Figure 1) Attach the silver link chain (B) to jaw bracket (C). Holding the sealer jaws together, push the jaw bracket pins up from…
