Category: Tektronix
-
Tektronix 6 Series B Mixed Signal Oscilloscopes Instruction Manual
6 Series B Mixed Signal OscilloscopesDeclassification and Security Instructions(MSO64B, MSO66B, MSO68B) Warning: The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. Supports Product Firmware V1.28 and above Register now!…
-
Tektronix TIVP IsoVu Measurement System Instruction Manual
Tektronix TIVP IsoVu Measurement System Operating information The Tektronix TIVP IsoVu™ Measurement System offers a completely galvanically isolated (optical isolation) system. Isolation is used to greatly increase the accuracy of differential measurements with rapidly slewing reference voltages and to isolate hazardous voltages from the oscilloscope.The TIVP is designed for use with Tektronix 4/5/6 Series MSO…
-
Tektronix AFG31000 Arbitrary Function Generator Installation Guide
Tektronix AFG31000 Arbitrary Function Generator Important information These release notes contain important information about version 1.6.1 of the AFG31000 software. Introduction This document provides supplemental information regarding the behavior of the AFG31000 software. This information is grouped into six categories: Revision history Lists the version of software, the document version, and the date of the…
-
Tektronix TPH1000 Probe Holder Instructions
Tektronix TPH1000 Probe Holder TPH1000 Probe HolderThe TPH1000 probe holder is a probe accessory that allows you to probe circuits and test points hands-free, without using hook clips or tape to keep the probe in contact with your circuit. The weight of the probe holder keeps the probe in contact with your circuit, and the…
-
Tektronix 4/5/6 Series MSO Installation Guide
Tektronix 4/5/6 Series MSO Installation Guide 4/5/6 Series MSO option license installation instructions This document describes how to install option license upgrades on your 4/5/6 Series MSO oscilloscope that are purchased after receiving your instrument. NOTE. These instructions do not pertain to options that were purchased and pre-installed on your instrument when ordered. Option license upgrades…
-
Tektronix SUP5-WIN, SUP5-LNX, SUP6-WIN, SUP6B-WIN, SUP6B-LNX MSO Installation Guide
5/6 Series MSOOption SUP5-WIN, SUP5-LNX, SUP6-WIN, SUP6B-WIN, SUP6B-LNXUpgrade Kit Installation Instructions Supports Product Firmware V1.28 and above Register now!Click the following link to protect your product.www.tek.com/register Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.…
-
Tektronix TekScope Analysis Datasheet
Tektronix TekScope Analysis Datasheet TekScope brings the power of the oscilloscope analysis environment to the PC. Users have the flexibility to perform analysis tasks including serial decode, power analysis, as well as timing, eye, and jitter analysis outside the lab. You can continue your session from your oscilloscope at any place and share the results.…
-
Tektronix MSO44, MSO46 4 Series Mixed Signal Oscilloscopes Instructions
Tektronix® 4 Series Mixed Signal Oscilloscopes Declassification and Security Instructions MSO44, MSO46 Warning: The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. Register now!Click the following link to protect…
-
Tektronix Phaser 340 Color Printer User Manual
Tektronix Phaser 340 Color Printer User Manual – Tektronix Phaser 340 Color Printer User Manual – [xyz-ips snippet=”download-snippet”]
