Category: ENFORCER
-
ENFORCER Bluetooth Mullion Keypad with Reader SK-B241-PQ User Manual
ENFORCER Bluetooth Mullion Keypad with Reader SK-B241-PQ Additional Information Operating voltage 9~25 VDC Current draw Standby , Active (max.) , Outputs Form C (Solid state) Alarm Egress input N.O. Ground Door sensor input N.C. Ground Proximity reader EM 125kHz IP Rating IP65 Weather-resistant Enclosure material Zinc alloy Operating humidity 0-95%, non-condensing Operating temperature -4°~122° F…
-
ENFORCER Bluetooth Access Controllers Instructions
ENFORCER Bluetooth Access Controllers The following is information to assist you in the operation of the ENFORCER Bluetooth® Access Controller we have installed. Your Personal Access Information Device Name: Device Location: Your User ID (case sensitive): Your Passcode: Effective Date: SL Access™ App Download the SL Access TM app for your phone by searching for…
-
ENFORCER SM-200Q/W Screw-Terminal Surface-Mount Contacts Instruction Manual
ENFORCER SM-200Q/W Screw-Terminal Surface-Mount Contacts Surface-mount magnetic contacts Screw mount using side tabs Terminal cover provided (required for all applications) ABS plastic case has lip to prevent wires from accidentally touching metal mountings and slotted mounting holes for easier gap adjustment Contact reed switch is SPST, deactivated rhodium on gold underplating for a longer expected…
-
ENFORCER SM-207-5Q W 3 /8″ Concealed-Mount Contacts, Stubby Instruction Manual
ENFORCER SM-207-5Q W 3 /8″ Concealed-Mount Contacts, Stubby Instruction Manual Product Features Used for protecting sliding doors and windows where space is limited 3 /8″ (10mm) Press-fit mount 15″ (38cm) Wire leads Contact reed switch is SPST, deactivated rhodium on gold under plating for a longer expected life Unique glue/epoxy compound protects reed switch For…
-
ENFORCER EAP-3D5Q Access Control Power Supply, Five Outputs User Manual
ENFORCER EAP-3D5Q Access Control Power Supply, Five Outputs User Manual Features Input 110~240 VAC, fused at 3.15A 5 Outputs individually fused (PTC, 1.1A), in both fail-safe and fail-secure modes DC Output failure supervision relay Filtered and electronically regulated outputs Individual LED status indicators for AC input,DC output, and channel outputs Adjustable output voltage to compensate…
-
ENFORCER 3 /8? Concealed-Mount Contacts SM-207Q User Manual
ENFORCER 3 /8ʺ Concealed-Mount Contacts SM-207Q Features Used for protecting sliding doors and windows where space is limited 3/8″ (10mm) Press-fit mount 15″ (38cm) Wire leads Contact reed switch is SPST, deactivated rhodium on gold underplating for a longer expected life Unique glue/epoxy compound protects reed switch For closed loop circuits 1″ (25mm) Gap Lifetime…
-
ENFORCER One- and Two-Channel RF Receivers Installation Guide
ENFORCER One- and Two-Channel RF Receivers Installation Guide Installation Manual One- and Two-Channel RF Receivers Flexible operating voltage: 11~24 VAC/VDC Independently programmable channels Compatible with all SECO-LARM transmitters of the same frequency 5 Relay output functions NOTE: Operating range will vary greatly depending on the installation and operating environment. Model Channels Output Frequency SK-910RBQ 1…
-
ENFORCER SK-910RB2Q One- and Two-Channel RF Receivers Installation Guide
ENFORCER SK-910RB2Q One- and Two-Channel RF Receivers One- and Two-Channel RF Receivers Flexible operating voltage: 11~24 VAC/VDC Independently programmable channels Compatible with all SECO-LARM transmitters of the same frequency 5 Relay output functions NOTE: Operating range will vary greatly depending on the installation and operating environment. Model Channels Output Frequency SK-910RBQ 1 10A Form “C”…
-
ENFORCER SK-91ERSD Extended Range Antenna User Manual
Extended Range AntennaManualSK-91ERSD – 315MHzSK-93ERSD – 433.92MHz* Extends the range of an RF receiver Range up to 1,000ft (300m) in open air with existing remote Easily plugs into a connector on the receiver’s PCB – No extra wiring needed Includes 9ft cable*Special order Specifications: Model SK-91ERSD SK-93ERSD Power supply +5VDC (±0.1VDC) Current draw <10mA Sensitivity…