Tag: ULINE
-
ULINE H-1075 20″ Vacuum Sealer User Manual
ULINE H-1075 20″ Vacuum Sealer User Manual uline.com EXTERNAL INTERNAL [xyz-ips snippet=”download-snippet”]
-
ULINE H-5686 Drum Blanket Heater User Guide
H-5686 DRUM BLANKET HEATER 1-800-295-5510uline.com PROPER USAGE The controller plugs into your GFCI-protected power supply (wall, etc.). The controller will power up when you plug in its power supply cord.Your drum blanket heater plugs into the output receptacle cord of the controller. The controller regulates power to the receptacle depending upon the temperature of the…
-
ULINE Laptop System Suspension Box Kit Installation Guide
S-6719,S-12703LAPTOP SYSTEM SUSPENSION BOX KIT1-800-295-5510uline.com PARTS INCLUDED Frame x 2 Accessory Pad x 1 Shipping Box x 1 ASSEMBLY Gently fold along the perforated sides and edges. Pull the long sides upward gently. Remove centerpiece. (See Figure 1) Fold panels completely upright. Hold panels together when inserting into box. (See Figure 2) Repeat steps 1-2…
-
ULINE Cubitainers Instructions
S-18116 ,S-18117CUBITAINERS®1-800-295-5510uline.com INSTRUCTIONS NOTIFICATION FOR ULINE UN/DOT PACKAGING FOR HAZARDOUS SOLIDS/LIQUIDSPlease note that under the U.S. Department of Transportation’s Title 49CFR, Section 173.22, it is the Shipper’s Responsibility to ensure that an authorized package has been selected for the product they intend to offer for transportation and that the selected package is properly closed for…
-
ULINE H-2112 Dumping Hopper Caster Installation Guide
ULINE H-2112 Dumping Hopper Caster Installation Guide CASTER INSTALLATION NOTE: Install casters one-at-a-time on each end of hopper.Two (2) rigid and two (2) swivel casters are included.You MUST determine placement of casters before installation. Placing the two swivel casters in the back is recommended. Drive lift truck forward until hopper’s fork pockets contact vertical legs…
-
ULINE Lids For Dumping Hoppers Installation Guide
ULINE Lids For Dumping Hoppers Installation Guide TOOLS NEEDED Pliers Tin Snips 1/2″ Wrench Power Drill 3/8″ Drill Bit PARTS Bolt x 8 Locknut x 8 Hinge/Lock Bar x 2 Right Bracket x 2 Left Bracket x 2 Cotter Pin x 2 Lid (2 pieces for H-3508 and H-3509) SAFETY WARNING! Ensure that all employees…
-
ULINE Peanut Dispensers Instruction Manual
ULINE Peanut Dispensers TOOLS NEEDED RECOMMENDED HARDWARE (NOT INCLUDED) PARTS PART QTY H-185 H-186 Capacity ———– 20 CU. FT. 40 CU. FT Canvas Bag 1 ✓ ✓ Chain and Rope 1 ✓ ✓ Flex Tubing 1 ✓ ✓ Steel Rod 2 ✓ ✓ Valve Assembly 1 ✓ ✓ Clamp Ring 1 ✓ ✓ U-Bolt 1…
-
ULINE Single Sided Floor Rack User Guide
ULINE Single Sided Floor Rack PARTS LIST Side Support Panel x 2 Louvered Panel x 1 Bolt x 12 Nut x 8 ASSEMBLY INSTRUCTIONS Take louvered panel (A) and line up holes (B) (stamped into the left and right side of the panel) to matching holes (C) stamped into each side support panel. Attach louvered…
-
ULINE Wall Mount Panel Racks Installation Guide
ULINE Wall Mount Panel Racks Installation Guide 1-800-295-5510uline.com ASSEMBLY NOTE: Fasteners not included. After determining the best size and type of fastener to use based on the mounting surface, fasteners will need to be purchased separately. Exercise caution when selecting a mounting surface or uprights. This must adequately support the louvered panel with a…
-
ULINE Anti-Static Mat User Guide
ULINE Anti-Static Mat USE AND CARE INITIAL MAT USE AND STORAGE Unroll mat within a few days of receipt. Let mat lay for 24 hours at room temperature before using. If the mat will not lie flat, move to a warm area. Heat will cause the vinyl mats to become more pliable and lay flat…
