Tag: Z-Wave

  • FAKRO Z-Wave Roller Shutter User Manual

    FAKRO Z-Wave Roller Shutter User Manual

    FAKRO Z-Wave Roller Shutter User Manual Dear Sir/Madam! Thank you for purchasing the product from FAKRO. To ensure appropriate functioning of the product, please peruse this User Manual. ROLLER SHUTTER DESCRIPTION The ARZ Z-Wave M roller shutter is designed for installation on roof windows and adapted for cooperation with Z-Wave remote control system elements with…

  • Z-Wave PAC01 JEM-A Adapter User Manual

    Z-Wave PAC01 JEM-A Adapter User Manual

    PAC01 Z-Wave JEM-A Adapter Introduction PAC01 is a security-enabled wireless JEM-A Adapter, based on Z-Wave Plus technology. Z-Wave Plus™ enabled devices displaying the Z-Wave Plus™logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturers’ Z-Wave ™ enabled networks. Z-Wave controller can On/Off the thermostat by sending Thermostat Setback command.PAC01…

  • EVALOGIK Z-Wave Smart Plug ZW39 Dimmer Installation Guide

    EVALOGIK Z-Wave Smart Plug ZW39 Dimmer Installation Guide

    ZW39Z-Wave Smart Plug(Dimmer)Installation Manual INTRODUCTION The EVA LOGIK ZW39 is a Z-Wave enabled 500W receptacle designed for most residential lighting and applications. It’s compatible with LED, halogen, incandescent.The ZW39 fully works with the Fibaro, Smartthings, Wink hub as well as all other certified Z-Wave controllers. Specifications: Power: 120VAC, 60HzLoading: 500WFrequency: 908.42MHzFCC ID: OXGZW36IC: 10460A-ZW36 Min…

  • Z-Wave SA301 Universal Module with 3 in 3 Out User Manual

    Z-Wave SA301 Universal Module with 3 in 3 Out User Manual

    UNIVERSAL MODULE WITH 3 In 3 Out The Universal Module is used to translate wired products into wireless Z-Wave protocol, integrating them into the Z-Wave network of a smarthome environment. It has 3 sets of input terminals and 3 sets of relay output. Through the Universal Module, the Z-Wave Controller can read the input signal…

  • MCO Home Z-Wave PM2.5 Monitor User Guide

    MCO Home Z-Wave PM2.5 Monitor User Guide

    MCO HomeZ-Wave PM2.5 MonitorSKU: MCOEMH10-PM Quickstart This is a Measuring Sensor Device for Europe. To run this device please connect it to your mains power supply. The MCOHome PM2.5 Monitor is an air quality controller which is compatible with Z-Wave technology, it is mainly used to monitor PM2.5 concentration. To protect yourself and others from…

  • LOGIC ZIF MODULE 5028 User Manual

    ZIF MODULE 5028 ZIF5028 – Z-Wave Interface for Automation System User’s manual EN ZIF MODULE5028Z-Wave Interface for Automation SystemsInstallation Guide and User’s ManualFirmware version 0.15 Logic Group A/S Page 1 / 25 ZIF5028 – Z-Wave Interface for Automation System User’s manual EN Logic Group A/S Page 2 / 25 Z-Wave DIN-rail Module Type ZIF5028 /…

  • Z-Wave RAZBERRY Plug-On Module User Manual

    Z-Wave RAZBERRY Plug-On Module User Manual

    Z-Wave RAZBERRY Plug-On Module Installation steps: Install the RaZberry 7 shield on the Raspberry Pi GPIO Install Z-Way software The RaZberry 7 shield is designed to work with the Raspberry Pi 4 Model B, but is fully compatible with all previous models, such as: A, A+, B, B+, 2B, Zero, Zero W, 3A+, 3B, 3B+.…

  • Z-Wave STRIPS Door and Window Sensor User Guide

    Z-Wave STRIPS Door and Window Sensor User Guide

    Sensative STRIPS Door and Window Sensor SKU: SENE1110 Quickstart This is a Alarm Sensor for Europe. To run this device please insert fresh 1 * built in LiMnO2 batteries. Please make sure the internal battery is fully charged. Strips is delivered in “auto-add” mode. Follow the process below to add Strips in a Z-Wave network.…

  • Z-Wave HS-WX300 In-Wall Dimmer and Switch User Guide

    Z-Wave HS-WX300 In-Wall Dimmer and Switch User Guide

    HS-WX300 User GuideOnline manual for the HS-WX300 In-wall Dimmer & Switch Overview HS-WX300 is a Z-Wave in-wall light switch that may be configured to operate as either a dimmer switch or an on/off switch. It may be installed with or without a neutral wire and it works with both wired and wireless companion switches in…

  • Z-Wave PAN 34 In Wall Roller Shutter Controller User Manual

    Z-Wave PAN 34 In Wall Roller Shutter Controller User Manual

    In Wall Roller shutter controllerPAN34 Introduction The in-wall Roller Shutter Controller is designed to switch rise/lower roller shutters connected to its terminals using radio waves, controllers, and a push-button directly connected to this Roller Controller.This in-wall Roller Shutter Con: roller is a Z-Wave Plus\’”‘ enabled wireless device fully compatible with any Z-WaveTM enabled networks. This…