Tag: Z-Wave

  • Z-Wave Slim Multisensor PST02-A/B/C User Manual

    Z-Wave Slim Multisensor PST02-A/B/C User Manual

    Z-Wave Slim Multisensor PST02-A/B/C The slim multisensor PST02 has PIR, door/window, temperature and illumination, 4 sensors function in one, based on Z-WaveTM technology. It is the Z-WaveTM plus product, it support the security, OTA… Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control…

  • Z-Wave Door/Window Sensor PSM08 User Manual

    Z-Wave Door/Window Sensor PSM08 User Manual

    Z-Wave Door/Window Sensor PSM08 User Manual Door/Window Sensor PSM08 The door/window sensor PSM08 has door/window sensor function,based on Z-WaveTM technology.This device is a Security Enabled Z-Wave Plus Product. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF…

  • Z-Wave IR Extender PAR01 User Manual

    Z-Wave IR Extender PAR01 User Manual

    Z-Wave IR Extender PAR01 User Manual PAR01, is a Z-Wave plus compliant Z-Wave-to-IR Bridge to control split air conditioner by receiving Z-Wave command and translating to Infrared command. With its comprehensive built-In and cloud-stored IR database (library). PAR01 can control different brands and models of air conditioners worldwide.PAR01 is a security enabled Z-Wave plus device.…

  • Aeotec Range Extender 7 User Guide

    Aeotec Range Extender 7 User Guide

      Aeotec Aeotec Range Extender 7 SKU: AEOEZW189     Quickstart This is a secure Range Extender for Europe. To run this device please connect it to your mains power supply. Open up your Z-Wave gateway/controller/app. Select SmartStart inclusion. Scan the QR code located on the Range Extender 7. Within 10 minutes after powering your…

  • Untitled post 477703

    Minoston™ Z-Wave™ Meter Plug User Manual Federal Communications Commission (FCC) Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This…

  • LEVITON Decora Smart family of Z-Wave enabled devices User Guide

    LEVITON Decora Smart family of Z-Wave enabled devices User Guide

    WEB-VERSIONGetting Started GuideTAMPER-RESISTANT OUTLETCat. No. ZW15R Welcome to the Decora SmartTM family of Z-Wave® enabled devices See the complete line of Z-Wave enabled dimmers, switches, outlets, fan speed controllers, and plug-ins at leviton.com/decorasmart. Welcome The Decora Smart branded Z-Wave enabled outlet is designed for use with modern Z-Wave hubs. This product can be operated in…

  • SecureCom Z-Wave Thermostat Z-5010T Installation Guide

    SecureCom Z-Wave Thermostat Z-5010T Installation Guide

  • Z-Wave WP-02SF Smart Water Valve Installation Guide

    Z-Wave WP-02SF Smart Water Valve Installation Guide

    Smart water valve Installation guideRev.00 The smart water valve can work in any Z-Wave” network with Z-Wave certified devices from other manufacturers. All non-battery-operated nodes within the network will act as repeaters regardless of vendor to increase the reliability of the network. Introduction WP-02SF water valve controller focuses on the handle ball valve with remote…

  • Qubino Flush Shutter Instructions

    Qubino Flush Shutter Instructions

    Qubino Flush Shutter Instructions QuickstartThis is a Roller Shutter for Europe. To run this device please connect it to your mains power supply. To add this device to your network execute the followingaction: Press push button I1 three times within 3s (3 times change switch state within 3 seconds) or Press service button S (only…

  • Z-Wave HS1SA-Z Smart Smoke Sensor User Guide

    Z-Wave HS1SA-Z Smart Smoke Sensor User Guide

    HS1SA-Z Z-Wave DeviceGuide Document 1-Device Inclusion – Click [Add] icon in Z-Wave PC Controller Program.– Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.– If Inclusion Process is successful, Green led will turn off. 2-Device Exclusion – Click [Remove] icon in Z-Wave PC Controller Program– Press the Net_Button…