Tag: ULINE
-
ULINE Service Kit For Impulse Sealer Instruction Manual
SERVICE KIT FOR IMPULSE SEALER TAPE AND HEATING ELEMENT REPLACEMENT INSTRUCTIONSCAUTION! Unplug the sealer from the socket before proceeding. Remove screws along with the cover plates (A) and top Teflon cover (B). Remove element (C) from terminal posts. (See Figure 1) If bottom adhesive Teflon tape (D) is worn, burned, or ripped, it needs to…
-
ULINE Dry Erase Board Instruction Manual
ULINE Dry Erase Board Instruction Manual FOR 2 x 1½’, 3 x 2′, 4 x 3′ BOARDS 1-800-295-5510uline.com TOOLS NEEDED PARTS OPTIONAL MARKER TRAY INSTALLATION NOTE: Attach marker tray to board frame before mounting board on wall. Center marker tray along the bottom board frame (horizontal or vertical orientation). (See Figure 1) Insert marker tray…
-
ULINE S-10758, S-14364, S-16913, S-19411, S-19414, S-21718 Open Top Steel Drums Instructions
ULINE S-10758, S-14364, S-16913, S-19411, S-19414, S-21718 Open Top Steel Drums CLOSURE INSTRUCTIONS Pursuant to the requirements of the Department of Transportation in CFR 49 Part 178.2(c)(1), this method of closure should be used to ensure that your containers have been closed in the same manner as when they were initially tested. RING CLOSURE…
-
ULINE H-5275 150 LBS. x .05 LB. Parcel Scale User Guide
ULINE H-5275 150 LBS. x .05 LB. Parcel Scale OVERVIEW OF CONTROLS CONTROL PANEL CONTROL PANEL PARTS # DESCRIPTION 1 Gross Weight Indicator 2 Units Indicator 3 Keypad 4 Mode Selection 5 Units 6 Zero CONTROL FUNCTIONS SET UP LEVELING With platter off, level the scale by adjusting the feet until the scale is stable…
-
ULINE H-5814 5 Gallon Portable Shop Vac User Guide
ULINE H-5814 5 Gallon Portable Shop Vac IMPORTANT SAFETY INSTRUCTIONS H-5814 SHOP-VAC®The Shop-Vac® wet/dry vacuum cleaners are for vacuuming wet and dry nonvolatile materials. Equipped with powerful, permanently lubricated motors and standard filtration systems. Double filtration is available for most Shop-Vac® models and is standard on Shop-Vac® commercial vacuums. Automatic float shutoff prevents overflow during…
-
ULINE Garage Tool Holder User Guide
ULINE Garage Tool Holder User Guide TOOLS NEEDED PARTS Mounting Bracket (2 for H-7866) (3 for H-7867) Mounting Bracket Clip (2 for H-7866) (3 for H-7867) End Cap x 2 Wall Anchor (Optional) (2 for H-7866) (3 for H-7867) Screw (2 for H-7866) (3 for H-7867) Holder (3 for H-7866) (5 for H-7867) Aluminum Rail…
-
ULINE Bathroom Mirror User Guide
ULINE Bathroom Mirror TOOLS NEEDED PARTS INSTALLATION Verify all dimensions and wall space prior to installation.NOTE: At least 1½” of clear space is needed above the mirror on the wall for easy installation. (See Figure 1) Hold mounting bracket on the wall where mirror will be placed. Mark four holes where screws and wall anchors…
-
ULINE H-214 Deluxe Packing Table User Guide
ULINE H-214 Deluxe Packing Table User Guide TOOLS NEEDED 7/16″ Wrench Flathead Screwdriver Phillips Screwdriver ASSEMBLY NOTE: Table unit is shipped in two cartons. The first contains the table top and leg assemblies; the other contains all the hardware, shelves, drawer, dowels and brackets. LEG ASSEMBLY Leave table top in the box for added protection…
-
ULINE Price Tag Gun Installation Guide
ULINE Price Tag Gun Installation Guide IMPORTANT! Read all instructions and warnings before using these tools. INSTALLING AND REMOVING NEEDLES TO INSTALL NEEDLE Slide needle guard over needle. (See Figure 1) Put needle lock lever in unlocked position (lever pointed to front of tool). (See Figure 2) Place tool so lock lever faces away from…
-
ULINE Stainless Steel Drums Instructions
ULINE Stainless Steel Drums Instructions CLOSURE INSTRUCTIONS BOLT RING CLOSURE FOR OPEN HEAD DRUMS CHECK GASKET – to ensure cover gasket is properly fitted into cover groove (See Figure 1 or 2). PLACE COVER ON DRUM – being careful to properly seat gasket all around curl (See Figure 3). POSITION & SEAT RING – with…
