Tag: ULINE
-
ULINE Fountain Roller Kit Instruction Manual
ULINE Fountain Roller Kit OPERATION FOUNTAIN ROLLER KIT INKING Fill the roller with the proper ink.NOTE: Only use compatible ink. Pump 30 to 50 strokes while rolling back and forth on a 6 x 18″ piece of oil board. Continue pumping while rolling. To get uniform distribution of ink, use extra firm pressure on the…
-
ULINE S-10452 Marine Shrink Vent Installation Guide
ULINE S-10452 Marine Shrink Vent Installation Guide INSTALLATION Mount on an unobstructed area on the cover. Do not mount against any hard surfaces. This will not allow proper air flow. Vent should be mounted on a vertical, 90° angle to keep rain/ snow from entering. For best results, mount the vent as high as possible.…
-
ULINE H-5121 Marine Shrink Cart Installation Guide
ULINE H-5121 Marine Shrink Cart Installation Guide TOOLS NEEDED 3/8″ Combination Wrench or Socket WrenchHammer PARTS 3/8″ Nuts x 8Support Pole D-clip x 4Caster/Frame x 2Support Poles x 2X-Support Poles x 2 ASSEMBLY Attach X-Support Pole (E) to the bottom of Caster/ Frame (C) using 3/8″ nuts (A). Tighten nuts firmly, but not completely, in…
-
ULINE Metal Buckles for Poly Strapping Instructions
ULINE Metal Buckles for Poly Strapping Instructions THREADING INSTRUCTIONS Insert end of strapping up through center of the buckle and around open leg to form a Pull top tight around leg. (See Figure 1) Wrap strapping around package. Loop strapping around remaining open leg of buckle. Pull loop tight around (See Figure 2) Pull both…
-
ULINE H-242 Industrial Steel Tensioner Instructions
H-2421-800-295-5510uline.comINDUSTRIAL STEEL TENSIONER INSTRUCTIONS THREADING TENSIONER Wrap both ends of strapping around the product. Sandwich strapping with the bottom strap facing towards you. (See Figure 1) Squeeze the handle towards the base and insert strapping under the gripper. Pull strapping as close to the product as possible to reduce the amount of tension that will…
-
ULINE H-8513 Work Stool with Arms Installation Guide
H-8513WORK STOOL WITH ARMS1-800-295-5510 – uline.com TOOL NEEDED TOOL INCLUDED PARTS ASSEMBLY Insert glides into the legs of the five-star base. Turn base upright. Insert gas lift into the center of the base. Slide footring onto the gas lift and tighten the knob to secure. Slide dust covers onto gas lift over footing. (See Figure…
-
ULINE Stencil Machine User Guide
ULINE Stencil Machine User Guide OPERATION NOTE:No assembly is necessary after you unpack your machine. INSERTING THE OIL BOARD Move the release lever to the right. This drops the lower feed roller and allows space to insert the oil board. Position the oil board so the top edge covers the punch center lines and then…
-
ULINE H-5334 Tabletop Paper Machine Installation Guide
H-5334TABLETOP PAPER MACHINE1-800 -295-5510uline.com TOOLS INCLUDED TOOL NEEDED ASSEMBLY Remove all parts from the three shipping cartons. Position the tabletop base on a flat workstation surface. Rotate the base so the shaft channel is facing the direction you want the paper to exit the machine from. (See Figure 1) Fasten the base to the workstation…
-
ULINE H-38 Standard Steel Tensioner Instructions
H-38STANDARD STEEL TENSIONER1-800 -295-5510uline.com INSTRUCTIONS THREADING TENSIONER Wrap both ends of strapping around the product. Sandwich strapping with the bottom strap facing towards you. Squeeze the handle towards the base and insert strapping under the gripper. Pull strapping as close to the product as possible to reduce the amount of tension that will be necessary.…
-
ULINE H-7628 Downtown Mesh Chair Installation Guide
H-7628DOWNTOWN MESH CHAIR1-7628 – uline.com TOOL INCLUDED PARTS ASSEMBLY Turn base upside down. Insert casters into the legs of the five-star base. Turn base upright. Insert gas lift into the center of the base. (See Figure 1) Align armrest with holes on the bottom of the seat cushion. Use three 1/4 x 1/” screws (8)…
