Category: ULINE
-
ULINE Gravity Roller Conveyors 1.9″ Diameter Rollers Instruction Manual
ULINE Gravity Roller Conveyors 1.9″ Diameter Rollers ASSEMBLY INSTRUCTIONS BOLTING CONVEYOR FRAME(S) TO H-STAND LEG SUPPORTS NOTE: H-Stands are sold separately.Hardware included: 4 hex head bolts, 4 flange nuts. Hardware is pre-screwed into the tops of the H-Stands. Remove the hardware. (See Figure 1) Bolting two H-Stands to one conveyor frame: PositionH- Stands on the…
-
ULINE Service Cart User Guide
ULINE Service Cart TOOLS NEEDED PARTS ASSEMBLY Insert caster sockets into each corner of shelf and tap in with rubber mallet until secure. (See Figure 1) Tap casters into caster sockets using rubber mallet. (See Figure 2) Tap supports onto bottom shelf using rubber mallet. (See Figure 3) Tap middle shelf onto supports using rubber…
-
ULINE Stainless Steel Platform Trucks Instruction Manual
ULINE Stainless Steel Platform Trucks Instruction Manual TOOLS NEEDED INSTRUCTIONS Attach casters to deck using screws. The platform truck will come with these screws already inserted into the underside of the (See Figure 1)Figure 1NOTE: Make sure same set of casters go on each end of the deck. (Rigid vs. Swivel) NOTE: Make sure same…
-
ULINE H-5670 Standard Stopwatch User Guide
ULINE H-5670 Standard Stopwatch User Guide uline.com OPERATION FEATURES Date/Time Functions: hour, minute, second, month, date and day. 12 or 24 hour system (selected by user). American (Month-Date) or European (Date-Month) calendar (selected by user). 1/100 second stopwatch with lap. Daily alarm. Hourly chime. NORMAL MODE TIME MODE Hour, minute, second and day are displayed.…
-
ULINE H-2273 Paper Dispenser User Guide
ULINE H-2273 Paper Dispenser User Guide uline.com TOOLS NEEDED PARTS MOUNTING Open dispenser cover completely by using either standard key or snap-in key. Hold dispenser to ideal mounting place on wall. Mark the four holes on the wall where screws will be inserted. Set dispenser aside and drill into wall at four marked locations with…
-
ULINE H-7544 Tork Center Pull Dispenser User Guide
ULINE H-7544 Tork Center Pull Dispenser TOOLS NEEDED Electric Drill Electric Drill Phillips Screwdriver Tape Measure Level PARTS Dispenser x 1 Dispenser Key x 1 Screw x 4 Wall Anchor x 4 USING THE KEY AND OPTIONAL PUSH BUTTON MODE USING THE KEY To open dispenser while keeping it locked, insert key at position A.…
-
ULINE Drum Platform Instructions
ULINE Drum Platform Instructions uline.com INSTRUCTIONS 1. Each unit includes two top hooks on adjacent sides. (See Figure 1) 2. Place platforms side-by-side in desired configuration. (See Figure 2) 3. Slightly lift side of platform with hook, and latch over adjacent unit. (See Figure 3) [xyz-ips snippet=”download-snippet”]
-
ULINE Reusable Earplugs User Guide
ULINE Reusable Earplugs FITTING INSTRUCTIONS Hold the stem of the earplug firmly behind the largest flange. (See Figure 1) Reach over your head with the opposite hand and pull the top of your ear to open the ear canal. While you are still holding the ear open, push the smallest flange of the plug into…
-
ULINE Bell Earplugs Instructions
ULINE Bell Earplugs FITTING INSTRUCTIONS WARNING! The earplug must be properly worn to provide effective protection. Roll to a small, crease-free cylinder. (See Figure 1) Insert into the ear canal and hold until plug expands. (See Figure 2) Remove the earplug slowly with a twisting motion to gradually break the seal. (See Figure 3) NOTE:…
-
ULINE H-992 MONARCH 1135 Two Line Label Gun Instructions
H-992MONARCH 1136TWO LINE LABEL GUN 1-800-295-5510uline.com INSTRUCTIONS CHANGING THE INK ROLLER Pull the latches back and swing the cover open completely. You should hear a click. NOTE: Do not force the cover past the click position. Hold the labeler sideways over a trash can while pushing the button to release the ink roller. (See Figure…
