Category: Lutron
-
LUTRON PD8-65A-120L3-15 QS DIN Rail Panels Installation Guide
QS DIN Rail PanelsInstallation Instructions Please Read Before Installing P/N 043557 Rev. B 07/2021 Model Voltage/ Frequency Input Maximum Feed Breaker Capacity PD8-65A-120L3-15PD8-65B-120L3-15 120/240 V– 50/60 Hz 125 A 1 Phase,3 Phase 15 A PD8-65A-120L3-20PD8-658-120L3-20 20 A P08-65A-120L4-15PD8-658-120L4-15 120/208 V– 50/60 Hz 3 Phase, 4-Wire 15 A PD8-65A-120L4-20PD8-658-120L4-20 PD8-B-ASM 120/240 V– 50/60 Hz 125 A…
-
LUTRON QS DIN Rail Panel User Guide
LUTRON QS DIN Rail Panel Lighting Control Systems Athena QS DIN Rail Panel Configurable Lighting Control panels arepre-assembled and tested power panels that are configurable to control multiple load types. Panelsare available with branch circuit breakers or as a feed-through control or satellite panel. The breaker panels come with a branch circuit breaker for each…
-
LUTRON MNS-DAL32-SZ Vive RMKS-DAL4-SZ PowerPak DALI Single Circuit Module 4 Fitting Installation Guide
PowPak | InstallationControl Module with DALIPart of the Vive Family220 – 240 V~ 50 / 60 Hz 50 mA 041797Rev. A02/2021 RMNS-DAL4-SZRMNS-DAL32-SZ DALI Control: 18 V=Guaranteed Supply Current: 8 mA on 4-driver controller (RMNS-DAL4-SZ) 64 mA on 32-driver controller (RMNS-DAL32-SZ)Maximum Supply Current: 250 mAImportant Notes: Please read before installing.For installation by a qualified electrician in…
-
LUTRON PRO LED+ Phase Adaptive Power Module User Guide
LQSE-4A5-120-D 120 V~ 50 / 60 Hz 16 A 032583 Rev. A05/2021 Numbered illustrations correlate to numbered instructions. PRO LED+ Phase Adaptive Power ModuleInstall Guide Please read before installing. WARNING Shock Hazard. May result in serious injury or death.Turn off power at circuit breaker before installing the unitButtons and LEDs in the unit are used for…
-
LED DownlightsIMPORTANT INFORMATIONPlease Read Before Installing Installation Instructions Important Notes IC fixtures must be used for installations containing insulating materials and must be mounted away from heat-producing elements (e.g., HVAC ducts, hot water pipes, radiant heat floors, ovens). Non-IC fixtures cannot be used in these types of applications. Non-IC fixtures are intended for free-air…
-
LUTRON Athena Lighting Control System User Guide
AthenaCommercial Lighting Control SystemIT Implementation GuideRevision C16 June 2021 Lutron Security Statement Lutron takes Cybersecurity very seriously We vigorously monitor the threat landscape and take a proactive approach to security and privacy, continuously working to update and enhance our systems and processes.At Lutron, we call our approach to cyber security “Secure Lifecycle,” and we would…
-
LUTRON Vive PowPak Phase Select Dimming Module User Manual
LUTRON Vive PowPak Phase Select Dimming Module Vive PowPak Phase Select Dimming Module The Vive PowPak Phase Select Dimming Module is a remote-mountable, radio-frequency (RF) dimmer that can operate independently or as a part of a Lutron Vive system. This PowPak module features PRO LED+ technology enabling dimming control in either forward- or reverse-phase down…
-
LUTRON Wireless Occupancy Vacancy Ceiling Sensor User Manual
Wireless Occupancy Vacancy Ceiling SensorUser Manual LRF -OCR2B-P-WH LRF2-VCR2B-P-WH Models Available Frequency / Channel Codes Available 2 = 431.0 – 437.0 MHz (U.S.A., Canada, Mexico, Brazil)3 = 868.125 – 869.850 MHz (Europe, U.A.E.)4 = 868.125 – 868.4755 MHz (China, Singapore)5 = 865.5 – 866.5 MHz (India)6 = 312.3 – 314.8 MHz (Japan)7 = 433.05 –…
-
LUTRON QS Wire Landing Board Installation Guide
LUTRON® QS Wire Landing Board Installation Instructions Please Read Before InstallingQS-WLB 24 V3 A Important Notes Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only. Codes Install in accordance with all local and national electrical codes. Installation WARNING: Shock Hazard. To avoid…
-
LUTRON Typical Wallbox Load Controls Instructions
LUTRON Typical Wallbox Load Controls Instructions WIRING LEGEND: NPUT POWER (NORMAL-EMERGENCY) INPUT POWER (NORMAL) 2 #12AWG (4 mm2) 0-10V SIGNAL: 2 #18AWG (1.0 mm2) ECOSYSTEM BUS/LOOP: LUTRON CABLE C-CBL-216-GR-1 (2 #16 CONDUCTOR NON-PLENUM) OR C-PCBL-216-CL-1 (2 #16 CONDUCTOR PLENUM RATED). OTHERWISE USE 2 #16 AWG (1.5 mm2) BY OTHERS. 1-WAY RF COMMUNICATION2-WAY RF COMMUNICATION 2…
