Tag: CLIPSAL
-
CLIPSAL USB Chargin Instructions
by Schoneider ElectricIconic® SeriesUSB Charging Module Installation Instructions PDL342USB2AC-VW Dual USB Charging Mechanism 40E2USBACM-VW PDL342USB-VW 40E1USBM-VW USB Charging Mechanism 40E2USBM-VW PDL342USB2-VW Dual USB Charging Mechanism NOTICEHAZARD OF EQUIPMENT DAMAGE (LOAD)The USB Charging Mechanism is intended for devices that are designed to be recharged via a USB port. Do not attempt to connect devices that are not…
-
CLIPSAL Wiser Link MIP User Guide
CLIPSAL Wiser Link MIP This instruction sheet must be kept for further use.Visit our website www.clipsal.com to download the technical documents of Wiser Link products.PLEASE NOTE This equipment must be installed and maintained by a qualified electrician. All relevant local, regional and national regulations must be followed during the installation and the use of this…
-
CLIPSAL Light Level Detector Surface Mount Installation Guide
CLIPSAL Light Level Detector Surface Mount Installation Guide Introduction The 5754PE Light Level Detector is a C-Bus input unit that measures the ambient light level and converts this information into messages that are sent across the C-Bus network. Ambient light levels are compared to the user-defined target light level. Control messages are then sent…
-
C-Bus 360° Occupancy/Light Level Detector,Surface Mount5754ODPE Installation Instructions C-Bus and Clipsal are registered trademarks of Schneider Electric.All other trademarks are the property of their respective owners.The information in this manual is provided in good faith. Schneider Electric has endeavored to ensure the relevance and accuracy of the information but assumes no responsibility for any loss…
-
CLIPSAL Ceiling Sweep Fan Instructions
CLIPSAL Ceiling Sweep Fan Instructions Included with your Fan A. Motor Assembly D. Screw PackB. Four Blades E. Mounting BracketC. Three-Speed Fan Controller …
-
CLIPSAL Electronics Motion Sensors Wiring Occupancy User Manual
Electronics Motion Sensors Wiring Occupancy Clipsal Motion and Occupancy SensorsThe sixth sense in security and energy management.clipsal.com/sensors 2IntroductionMotion and occupancy sensors offer benefits in security, energy management, hospitality and true `hands-free’ convenience. A motion sensor is a lighting control device that detects movement, such as a person walking into a space. Once detection occurs loads…
-
CLIPSAL FanLight and Heater Unit Instructions
Fan, Light and Heater Unit 7600ATP Fitting Instructions This card is also your installation template.IMPROVED DESIGN now with ceramic lamp holders. Thank you for purchasing this Clipsal product. Please install the product carefully, according to these instructions. Clipsal 3-in-1 products combine an exhaust fan, light and gentle heat in one single unit. All functions switch…
-
CLIPSAL 360° Infrascan passive infrared motion sensor Safety Information The Infrascan units are mains-connected devices. They are designed for indoor use in residences and businesses. The products must be installed by qualified and licensed personnel. There are no user serviceable parts inside the units.A ‘WARNING’ in this document alerts you to a hazard that, if…
-
CLIPSAL LED Floodlight Instructions
CLIPSAL LED Floodlight Instructions Product Range TPFLS10LED 10 W LED Floodlight, 240 V a.c., 4000 K, IP65 TPFLS20LED 20 W LED Floodlight, 240 V a.c., 4000 K, IP65 TPFLS50LED 50 W LED Floodlight, 240 V a.c., 4000 K, IP65 TPFLS100LED 100 W LED Floodlight, 240 V a.c., 4000 K, IP65 TPFLS20SENLED 20 W…
-
CLIPSAL Iconic Series PIR Motion Sensor Mechanism Instruction Manual
CLIPSAL Iconic Series PIR Motion Sensor Mechanism Instruction Manual DANGERHAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH It is illegal for persons other than an appropriately licensed electrical contractors or other persons authorised by legislation to work on the fixed wiring of any electrical installation. To comply with all safety standards, the product must be…
